30cmx15cm Sheepskin Car Central Arm Rest Box Cushion Universal

Description:Brand New Horn Snail Compact AirhornVoltage:12VColor:BlackSize: 12X11x4.8cmPart Number: 007Easy to installIt requires only one fixing pointNo air tubes neededNo external air supply neededFitment:Fit For Car ,Vehicle ,Motorcycle,Yacht,Boat,SUV, Bike,ectInstallation Note:Connected directly to the battery relayIf you have not connected the horn relay,Can cause electrical problemIt is recommended to use 20A-30A FuseMounting angle downward,so that moisture can not collect in the hornIf no sound or strange sound ,check the horn -wire (+/-)Connect the grounding cable to avoid sparkDisconnect the ground cable first removeBe careful not to put too close to the chassis of the horn-trumpe trattling noise reductionPackage included:1 x Air Horn1xRelay

Featuring two inlet ports on the front, a ventilated shinplate, perforated padding and extensive mesh sections, the Tech 10 Supervented has been designed for maximum airflow through the boot’s front and effective heat exchange. The new mesh inner bootie boasts a 3D Higher Spring insole which uses air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort. There is also a new sole with an extended honeycomb design for superior grip and feel on the bike’s pegs, especially in wet and muddy conditions.
Features: Lightweight microfiber upper combined with impact and abrasion-resistant TPU shell Performance double pivot motion control system
Medial and lateral double pivot system for improved levels of flexibility and precision control Engineered front flexion control offered by a dual front blade system plus shock absorber insert to offer mechanical progressive force release which dampens and absorbs impact energies Redesigned dual density TPU rear blade system engineered to prevent hyperextension while offering improved flex control and impact resistance
Lightweight single-piece co-injected foot chassis with built-in Dynamic Heel Compression Protector (DHCP) Co-injected TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance Contoured calf protector wraps ergonomically around rear of leg and is constructed from a dual density compound rear blade system Shin plate features new anatomic design for reduced surface area and weight saving Sole is completely redesigned with proprietary grip sculpturing Central sole insert features micro grip and side hooking grip design New buckle closure system features a nylon and fiberglass compound for improved durability and strength Redesigned biomechanical inner ankle brace system
Lighter, anatomically redesigned medial and lateral torsion bars for ankle and leg rotation and progressive dampening of torsional forces while still allowing natural freedom of movement New low-profile, pull-on design TPU protection and shock absorbing padding on the heel and ankles Ultra-thin and flexible forefoot area for increased sensitivity and control Removable dual compound footbed
Heel and toe protection Integrated shank for support and structural integrity Dual closure system with internal microfiber flap plus hook-and-loop fasteners for a precise fit Soft microfiber gaiter seals out water and dirt Poly fabric lining with 3D open cell foam with anti-sliding suede on heel

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Description:1. Newest generation GPS chipset2. Built-in GPS/GSM antenna,Quad band3. Buit in battery (270mAh)4. GPS chipset with high sensitivity, High integration density5. Wide range power input 8-90V6. 3000 points history trace can be saved without GSM coverage7. Quick GPS fixed with Assist-GPS technology8. Real time tracking via Web, APP and SMS9. Built-in vibration sensor, perform vehicle intelligent robbery protection10. ACC detection, to upload status of vehicle operation11. Oil cut off12. Voice monitor13. Over speed alert, Vibration alert, Power cut off alert, Low battery alert, Geo-fence alert14.3 special numbers for SOS alarm and burglar alarm15. SOS alarm button for emergency callFunctions:1. Built-in high sensitive GPSGSM antenna2. ACC ignition detection3. SOS button for SOS alarm4. Voice monitor function5. External power disconnect alarm for anti-theftFAQ:1. Why the GPS tracker device can off-line?Maybe there are 3 reasons i.e. device poweroff or outage, weak or none signal, SIM card debts or GPRS service overdue.2. How can you handle with Question 1?Firstly use your phone call the number of SIM card, then check the voltage and current data whether beyond the specified range or switch off the circuit; Take off the environment of closed or the mental objects; Call the operator of SIM card to assure the card is debts or GPRS overdue and pay the fee or update GPRS.3. Why you can not monitor?Because you didnt set up the specific number and open the caller display of y

Marushin continues this tradition with the newly developed 999 RS Comfort. The integrated sun visor, a visor with innovative quick-change mechanism and Pinlock® prepared, the temperature and moisture regulating interior or Marushin ratchet are some innovations that help make even the 999 RS Comfort is an all-rounder in terms of comfort, safety and functionality ,
Very easy. Compact size of the helmet shell. Suitable for spectacle wearers. Prepared for the installation of communication systems. Material
Newly developed, aerodynamically optimized fiberglass helmet shell in two shell sizes from an extremely lightweight, yet high-strength material composition.
Ventilation
The completely redesigned ventilation system optimized in the wind tunnel now allows more air to flow into the helmet via multiple air inlets and outlets. Of course, all slides with gloves are easy to use.
Interior decoration
The Marushin®-Cool interior with improved moisture absorption and faster drying for a comfortable fit effectively inhibits odor and bacteria formation. The head and cheek pads are completely removable and washable. The newly developed cheek pads ensure a perfect fit of the helmet even at high speeds and are designed so that eyeglass temples can easily fit.
Visor
Clear, scratch-resistant, Pinlock®-prepared.
Weight
1.290 g (+/- 50 g)
Clasp
Micro ratchet fastener - all components relevant to safety are made of stainless steel. The renunciation of plastic provides maximum security. The closure is easy to use and easy to adjust.
Exam
ECE 22/05

Kunststoffplatten aus Spritzguss schützen vor harten Aufschlägen Gute Handhabung durch drei leicht verstellbare Verschlussschnallen Strapazierfähige Goodyear Sohle als Ersatzteil erhältlich Griffige Profilsohle, ideal für Track, Trail und ATV Fahrer Integrierter Zehenschutz aus Metall Erhöhter Tragekomfort dank Air-Mesh-Innenleben, großzügiger Verstärkung der Ferse und gepolsterer Einlegesohle Integreirte Lasche am Hinterteil des Schafts Ersatzriemen und -schnallen erhältlich Übersteigt die Standards der Norm EN13634