The Kidde KID7DCOC continuously monitors for the presence of deadly Carbon Monoxide in the home providing a constant protection against its effects. As well as twin red and green LED's, the 7DCO features a digital display that continuously displays CO levels detected. The alarm can either be installed on a wall or just placed on a tabletop or shelf for added convenience. It is also ideal for use when on holiday, in rented accommodation, or for use in caravans and boats and complies with the very latest EN50291.2010 standards, Parts 1 & 2 (boats and caravans). The Kidde 7DCO Carbon Monoxide Alarm features an industry leading 10 year sensor life, meaning it lasts 40% longer than any other CO alarm. The alarm has an end of life warning to replace the unit after ten year's protection.
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 76mm x 102mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Visi
This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses. Screws Included. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch. Backplate Size: 102 x 40mm.Finish: Victorian Brass.