The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).
The Makita DUB362 Brushless Blower has been developed as the most powerful cordless blower with a brushless motor for increased runtime, high air volume and speed. Powered by two 18 Volt Li-Ion batteries (NOT SUPPLIED) in series to supply energy to the powerful 36 Volt DC motor drive system. Has a lightweight, compact design for single handed operation with a lock on function, the button is operable from either side of handle. 6-stage air volume/velocity settings via a dial with variable speed control by trigger. Supplied with a 3-stage telescopic long nozzle that has an adjustment range of 100mm. Bare Unit, No Battery or Charger Supplied. Specification Max Air Flow: 27/54m/s. Air Speed: 11,400/21,500/min. Max Air Volume: 6.9/13.4m³/min. Weight: 1.4kg.
High sanding capacity, little clogging and long service life guaranteed thanks to corundum abrasive grit and full bonding with artificial resins. For universal use on virtually all materials. Perforated, for use with perforated sanding pad and dust extraction, hook and loop fastening.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Bahco 2600-22-10P Superior Handsaw has a thicker blade than conventional handsaws and is developed according to the scientific ERGO™ process. Hardpoint teeth with a black, friction reducing coating. Handle is of 2-component construction with softer plastic in the grip area. Gives very fast cutting on modern medium-hard materials such as chipboard or plastics. Length: 550mm (22in)TPI: 9
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 6mm
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
