Wall Tapestry Art Decor Blanket Curtain Picnic Tablecloth Hanging Home Bedroom Living Room Dorm Decoration Nature Landscape Misty Forest Jungle River

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

The DEWALT DCK654P3T XR Compact TSTAK­ Kit, contains the following: 1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57 percent more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18 Volt 125mm DCG412 XR Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt 165mm DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: 90 degree : 55mm, 45 degree : 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18 Volt DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg.

Quantity:1PC; Type:Cake Molds,Dessert Tools; Application:For Ice,Multifunction; Material:Silica Gel; Item Type:Cake Molds,Baking Pastry Tools; Features:DIY,Creative,3D,Cool; Product Dimensions:0.0000.0000.000; Listing Date:03/11/2020

Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 600mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.93kg.

High sanding capacity, little clogging and long service life guaranteed thanks to corundum abrasive grit and full bonding with artificial resins. For universal use on virtually all materials. Perforated, for use with perforated sanding pad and dust extraction, hook and loop fastening.

This Teng Tools Aluminium Clip Rail is ideal for mounting on a wall or for use in a toolbox, to conveniently store Teng sockets. It is suitable for use with clips for 1/4 inch, 3/8 inch and 1/2 inch sockets, which clip onto the single track rail and which hold the socket in place. Clips NOT included.The TENALU430 Section Rail has the following length: 1 metre.