Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 75mm.Pack quantity: 50.
These Faithfull Padlocks have a brass body and steel shackle. They have a self-locking action. These Faithfull brass bodied padlocks provide an excellent level of security. Each lock features a high strength, brass cylinder mechanism that is accurately machined, durable and rust resistant. They have stainless shackle springs and a steel shackle. All locks above 30mm in body size have hardened anti-cut and saw resistant shackle with double locking tongues for improved security. Each pack is supplied with 3 keys.The FAIPLB20 Brass Padlock is suitable for use in low security applications such as luggage, lockers and toolboxes. It features a 4-pin tumbler locking mechanism and has the following specifications: Overall Width: 20mm.Internal Shackle (WxH): 10.7 x 11.1mm.Shackle Diameter: 3.3mm.
The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron
The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.
