Features:
LCD display, brief key operation, very convenient.
PWM charge mode can improve system efficiency and prolong the life span of the battery.
Automatic indentification system voltage level, automatic temperature compensation.
Adjustable charge-discharge control parameters, settable operating modes of loads.
Over-load/short-circuit protection, battery reverse-discharge/reverse connection protection.
Battery low voltage disconnection(LVD).
Accumulated function of charge and discharge ampere hours.
Suitable for street and pathway lighting, parking area, bus station, etc.
Features:
Upgraded metal central transmission shaft
2.4GH 4WD RC car Buggy style
1/18 Scale suitable for indoor and outdoor control
High quality car body
Four-wheel independent suspension
Come with 4-wheel shock absorbers
With Proportional Steering function
45km/h above for the high speed
100 meter control distance
This Supermarine Spitfire MkI Diecast Model Airplane has working propeller and also comes with a display stand. It is made by Oxford Diecast and is 1:72 scale (approx. 14cm / 5.5in wingspan).
Features:
With electronic compass and barometer.
SP Racing F3 Flight Control With Integrated OSD for Multicopter.
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader.
There MEGA328 ISP port on the back of the board, will not deadlock bootloader.
Looptime up to about 2 times the previous generation based stm32F1 flight control.
Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time.
The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux).
Tiny and lightweight.
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing.
All using 2.54 interface.
PDB can be more perfect combination.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED screen.
Buzzer port for audible warnings and notification.
F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).
