1279 Sprinkle Sink Faucets Brass Bathroom Faucet Contemporary with LED Chrome Contain with Cold and Hot Water Lightinthebox

Socket set 1/4in and 1/2in square drive and combination spanners with dynamic drive profile. Consisting of: 12 x 1/4in Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 & 13mm.10 x 1/4in Hex Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm.13 x 1/2in Hex Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30 & 32mm. 5 x 1/4in Phillips Bits: PH0, PH1, PH2, PH3 & PH4.3 x 1/4in Slotted Bits: 4, 5.5 & 7mm.3 x 1/4in Pozidrive Bits: PZ1, PZ2 & PZ3.6 x 1/4in Hex Bits: 3, 4, 5, 6, 8 & 10mm.8 x 1/4in Torx Bits: T8, T10, T15, T20, T25, T27, T30 & T40.3 x 5/16in Torx Bits: T45, T50 & T55.1 x 1/2in Spark Plug Socket: 21mm (13/16in). 2 x 1/4in Extension Bars: 50 & 100mm.2 x 1/2in Extension Bars: 125 & 250mm.1 x 1/4in Universal Joint, 1 x 1/2in Universal Joint.1 x 1/4in Bit Holder, 1 x 1/2in Bit Holder.1 x 1/4in Bit Adaptor, 1 x 1/4in Magnetic Bit Adaptor. 1 x 1/4in Sliding T-Bar, 1 x 1/4in Spinner Handle.1 x 1/2in T Adaptor. 1 x 1/4in Reversible Ratchet.1 x 1/2in Reversible Ratchet. 3 x Hex Keys: 1.5, 2 & 2.5mm.4 x Flex Head Wrenches: 8x9, 10x11, 12x13 & 14x15mm.6 x Combination Wrenches 8, 10, 12, 13, 14 & 17mm. 1 x Impact & Oil Resistant Case. 1 x Removable Tool Rack for Combination Spanners.

Quantity:1; Theme:Birthday; Type:Dreamcatcher; Shipping Weight:0.029; Net Weight:0.026; Listing Date:05/31/2021; Size:27

It has an all metal keyed chuck for maximum durability and bit retention, for added convenience it also has an on-board chuck key holder. The POWERSTATE® brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,200/min.Chuck Size: 13mm.Capacity: Wood: Auger Bits: 38mm, Self-Feed Bits: 50mm.Length: 431.8mm.Weight: 3.3kg.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Abrazadera para marco de carpintería Correa para sujetar imagen Correa Abrazadera Ángulo Correa Abrazadera Mitre Mitre Tornillo Herramienta

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : White Finish : Smooth Size : 400ml Coverage : 0.5m²/L