Faithfull No.9.1/2 Block Plane in Wooden Box

The SMJ IP44 Sunset Switch detects when light levels drop below a certain amount and then activates the switch with timer. It is ideal for use with garden lights and loads upto 1400 Watt. Supplied with or without a timer.The IP44 Sunset Switch with Timer. The timer function can be adjusted from 2 to 8 hours.

Dobladora de tubos de alta resistencia de 180 grados Dobladora de tubos de 8 mm Tubo de cobre de 5/16 "Herramienta de doblado de tubos de aire acondicionado Herramienta de codo manual

Stahlwille Screwdriver sockets for inside TORX® screws. 1/4in square drive. Made from chrome alloy steel and chrome plated. Overall length: 28mm. MADE IN GERMANY.Stahlwille Torx Bit Socket 1/4in Drive. Size: T30.

Its high torque motor offers durability and power for cutting job site and joinery materials. The guide rail is compatible for quick and easy use with the DEWALT guide rail system and the additional handle allows safe two-handed work. The Circular saw allows variable bevel adjustment to 57°. A protection hood provides up to 95% sawdust extraction. It has optimum balance for safe, fatigue-free operation.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

The Knipex TwinKey® Service Cabinet Key for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems. Consists of two 4-way spider keys connected using magnets providing space saving storage. It has the following functions: 4 x Square: 5, 6-7, 8-9 & 10-11mm.3 x Triangular: 7-8, 9-10 & 11-12mm.1 x Two-Way: 3-5mm.1 x Half-moon: 6mm.1 x Long Execution Conical Square: 6, 7, 8 & 9mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).