Widely used in automotive, aviation, diesel and farm equipment manufacture and also in jig, fixture and gauge work. Packed individually in envelope.Metric gauge 300 mm long.Thickness: 0.03mm
The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)
Medium flexibility grinder pads suggested for 60+ finer grits. It's unique flexibility and durability make this our best selling pad. This range can be considered for universal use. Made in Great BritainType. 116-14MTo suit. 125 mm Mini Grinders.Thread.M14 x 2. Abrasive Disc Size 125 mm x 22 mm (5in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, ELU, Fein, Flex, Hitachi, Holzher, Kress, Makita, Manson, Metabo, Perlea, Ryobi, Stayer, Teksan. Pin Spanner - Red
The Britool BRIE121203B set of 6 ball ended T-handle hex keys are crafted in silicon steel and finished in black phosphate. The ergonomic T-handle allows effective use of either end of the wrench with the ball ended head allowing an angle up to 15° . 6 x Ball Ended Hex Keys: 4, 5, 6, 7, 8 and 10mm.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.