Spidi MOTORSPORT is a vintage style leather jacket for custom and streetbike use, also very good for short to mid range touring. Technical features: Arrangement for internal Lady protector Biomechanic protectors 60g/m2 removable insulating liner Clip stop for casual pants attach Adjustable waist fastening Zip to reduce volumes Highly fitting cowhide with 0.6/0.8mm thickness High visibility reflex areas
Features Waterproof and breathable Adjustable zipped ventilation Removable warm lining Adjustable zipped ventilation: front and back Waterproof and breathable with Drymesh 5/5 fixed membrane Classic collar with neoprene high neckroll Tightening strap on cuffs and bottom Press-stud on biceps 2 external pockets. 4 internal pockets. 1 waterproof wallet pocket Connection with trousers thanks to zip 270° Reflective elements approved elbow and shoulder protectors according to the standard 1621-1 + Back pocket to welcome a certified back protector PPE certified
Features: 4 zipped pockets 2 inside pockets quality metal zippers elastic comfort panels on sides and sleeves to optimize freedom of movement Belt adjustment at the waistband elastic stretch leather on the shoulder Security SAS-TEC protectors at the shoulders Back and elbow retrofitted
Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays Ventilation: 10 points of aerodynamically designed flush fit ventilation with chin, top, rear, and unique side extraction vents. 5 intake vents and 5 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with left side slide lever Visor: A removable and adjustable (40mm) screw-on visor 7 in 1: Helmet can be configured one of seven different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-55 weighs 1.68 kg or 3.69 lbs Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.
The ARIZONA is a 100% full-grain leather glove with a distinct personality, beautifully combining quilted and perforated leathers, and allying design with protection. It features thick leather reinforcements overstitched on the edge of the hand, which are not only decorative, but also aimed at protecting the riderâs hand in the event of a fall. Closure via a leather tab with a press-stud embossed with FIVE. With its unique character, superb details, and quality materials, it is the very living essence of vintage culture. Features Total full-grain goatskin construction for suppleness (palm and topside), perforated for ventilation (topside) Metacarpal-knuckle protection with memory foam concealed underneath the leather Hypothenar muscle protection with full-grain cowhide reinforcement panel Perforated goatskin palm reinforcement Leather accordion comfort gussets Closure system with leather tab + press-stud and leather on-off pull tab
Features waterproof, windproof and breatheable through climate membran removeable thermal lining width-adjustable through Velcro fastener at the hip and leg end elastic comfort inserts on the knee and butt ergonomically adjusted cut connection zipper Anti-slip material on the posterior 4 pockets including 2 waterproof Cargo-Pockets on the thighs height adjustable- and removeable protectors on the knee SAS-TEC protectors retrofitted on hips safety saems in accordance with ISO 4916 heavy duty 450 D polyester fabric combined with a climate membrane breathable net inner lining
Features Lightweight Protection: Stone shield constructed with energy dispersing molded panels Support: Adjustable elastic torso strap with ratcheting buckle closure Strategically placed ventilation ports for maximum cooling Soft chassis liner molded for maximum comfort European Standard EN 14021:2003
