Milwaukee Concrete Drill Bits with a round shank and diamond ground percussion carbide tip with a dual cutting edge. They are ideal for drilling in brick, tile, ceramic, concrete, plaster, slate, and aerated concrete blocks. Conform to DIN 8039 standards.Milwaukee Concrete Drill Bit. Diameter: 7mm.Working Length: 60mm.Overall Length: 100mm.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 4.50mm.Working length: 47mm.Overall length: 80mm.
features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and the LED display shows current temperature and start/stop temperature. This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc.
Features:
Show the measured temperature, start temperature and stop temperature at the same time.
Digital tube LED display for clear readings, 4 buttons for easy operation.
Pre-wired cord with a plug, plug and play design for convenient use.
Heating/refrigeration modes, users can set the start/stop temperature freely.
Temperature measuring range: -9C~99C; resolution: 0.1C.
Also with temperature calibration function.
Indicator light for indicating working status.
Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc.
Note:
This controller can not be used with air conditioner and compressor.
Beschreibung 355 PZ 2 x 250 mm Schraubendreher Hochwertiger Kraftform Plus Schraubendreher von Wera. Mehrkomponentiger Kraftform Griff. Lasertip-Spitzen: Microraue Oberfläche, die sich im Schraubenkopf festbeisst. Dadurch weniger Ausrutscher, weniger Aufpressdruck notwendig. Mit Sechskantabrollschutz gegen Wegrollen. Mit Griffkennzeichnung zum leichteren Finden und Sortieren des Werkzeugs. Ausstattung: Kraftform Plus Schraubendreher bringen höhere Kraftübertragung bei geringer Anstrengung und schonen das gesamte Hand-Arm-System - auch im Dauereinsatz. Durch die hervorragend an die Hand angepasste Form des Kraftform-Griffs werden Handverletzungen wie Blasen und Schwielen vermieden. Die für den Griff verwendeten harten Materialien (schwarze Griffzonen) ren schnelles Umgreifen ohne die Gefahr des """"Festklebens"""" der Haut am Griff. Die weicheren, """"rutschfesten"""" Zonen (grün) ermöglichen die verlustfreie Übertragung hoher Kräfte. Die Kennzeichnung des Griffs mit Schraubensymbol und Profilgröße
