Faithfull aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook and loop quick change system. Suitable for use on wood, metal, plastics and filler. Pattern: Plain.Diameter: 125mm. Assorted grits.
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
Hardened steel punches carefully heat treated for long life.Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling.Walleted set of 4 containing one of each of the following sizes.1/16, 3/32, 1/8, and 3/16 in.Length 4 in
Waterproof Tanking Kit containing:-Waterproof Tanking Primer for use before applying Tanking Membrane and Tanking Tape.Waterproof Tanking Membrane which forms a permanently flexible watertight membrane, applied by brush, two coats. Waterproof Tanking tape, a self adhesive joint and corner sealing tape.Waterproof Tanking Drain Mat, a self adhesive butyl backed fleece, capable of coping with movement around the drain outlet. All you need to waterproof 7.5 square metres
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Bulk 1000
Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).
