MATERIALGewachste Cordura 500 w / a Hand gefertigte Behandlung Miporex Membran Baumwolle / Viskose-Twill-Futter abnehmbare weiche Protektoren an den Knien und Hüften innere Struktur: Herausnehmbares Steppfutter SCHUTZProtektoren mit der EU-Richtlinie 89/686 / EWG und der technische Norm EN 1621-1: 2012 TASCHENZwei Fronttaschen classic FEATURESVersiegelte Nähte Membran Wasserdichter Reissverschluß Reflex-Paspel am Unterschenkel GRÖSSEN: 44-46-48-50-52-54-56-58
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
The new Dakar glove combines all the necessary functions for a safe ride in summer! This ultra ergonomic glove offers you an ideal balance between ventilation and protection. The rubber ankle protector features a high impact absorption, guaranteeing the maximum safety standard for this summer glove. The combination of soft goat leather and the multi-stretchy and breathable zones, guarantee a perfect stop on your long and hot trip to the Dakar finish! Features Goat leather combined with nyspan, air mesh & spandex Rubber knuckle protector Richa gel impact protection Temper foam reinforcements on palm & little finger Conductive fabric on index finger & thumb (for smartphone or navigation system)
Imperméable et respirante avec insert intégré Fermeture avec lacets, poche sur la langue pour stocker les lacets, caché des oeillets 2 paires de lacets livrés: 1 noir et 1 en contraste Facile à mettre grâce à une fermeture zippée sur la face interne Bande Velcro sur le devant pour un bon maintien de la cheville Semelle extérieure exclusive anti-dérapants Semelle intérieure antibactérienne Préformées pour s'adapter aux repose-pieds renforts internes et externes sur le renfort malléole et carbon-look sur sélecteur