Bahco 1-476 4in Key Files have a handle developed according to the scientific ERGO™ process. This set is perfect for fine filing and polishing jobs. The set contains one of each handled file: hand, warding, square, three square, half round and round. Supplied in a snap-shut plastic wallet with hanging hole. Type of cut: 3 Smooth.Blade Length: 100mm.
The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMCH066 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guidebar slot 0.325 mm and Low profile (L/P) 1.1 mm guidebar slot.This chain is made to fit the Ryobi range and suit saws with a 40cm bar and chain with 66 drive links including:PCN-3840, PCN-4040.
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10
The RIDGID Heavy-Duty End Pipe Wrenches are ideal for pipe work close to a wall, in tight quarters or in closely-spaced parallel lines. It has a sturdy cast-iron housing with an I-beam handle with full floating forged hook jaw and self-cleaning threads. The hook and heel jaws are replaceable.RIDGID Heavy-Duty End Pipe Wrench Size: 350mm (14in).Capacity: 50mm (2in).Weight: 1.6kg.
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 40mmColour : Brown.Pack : Clam pack of 1000.
The Hitachi DN18DSL/L4 Angle Drill 18 Volt with a lightweight, compact design and a 10mm keyless single sleeve chuck. It is the class leader, with a low centre height of 23mm, for easier working in confined spaces. The variable speed paddle and battery life indicator mean more effective work time and less down time. The drill is fitted with a soft grip for improved comfort and control. There is also a handy white LED work light and a belt clip, which can be fitted on the left or right hand side. It has an all new design and is compatible with the full range of 18 Volt slide tools, accepts all Hitachi 18V Li-Ion slide batteries from 1.5Ah to 5.0Ah ( please note this machine is supplied BARE, WITHOUT a battery). Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-1,800/min.Max Torque: 12Nm.Capacity: Wood: 28mm, Steel: 10mm.Centre Height: 23mm.Head Height: 88mm.Overall Length: 326mm.Weight: 1.7kg.
The Milwaukee PLH 20 SDS-Plus L Shape Hammer is a 2 mode drill - hammer drilling and rotary drilling - for maximum versatility. It has an SDS-plus chuck, with optimised hammer drilling at 5 – 12 mm. It has a forward and reverse mechanism. The PLH 20 features motor cooling airflow that is designed in a way that blows drilling debris away from the user when drilling overhead. A safety clutch protects user and machine if the drill bit jams. The drill has AVS (Anti-Vibration-System) to provide more comfortable use and less strain. The soft-grip handle and ergonomic 2-finger trigger with variable speed control increase the comfort further. Supplied in a kitbox. Specification Modes: Hammer Drilling, Rotary Drilling. Input Power: 620 Watt. No Load Speed: 0-2,700/min. Impact Rate: 0-4,400/bpm with 2.0 Joules. Capacity: Concrete: 20mm, Steel: 13mm, Wood: 30mm. Chuck: SDS-Plus. Cable Length: 4m. Weight: 1.9kg.
