Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

The Porta-Nails Angled Nailer has a lightweight, durable design. To guarantee that the nails are set properly each time, the ratcheting ram allows for single or multi-hits. The multi-hit function helps to minimise fatigue whilst providing greater impact. Interchangeable shoe attachments (not included) provide multiple flooring options. The nailer is supplied with:Extension handle.Mallet.Angled shoe for 5/8in - 33/32in tongue and groove flooring.Wrenches.Rugged carry case. Specification Fastener capacity: 100 x 16 Gauge 'T' Cleats.Operating pressure: Manual.Dimensions: 387 x 457 x 76mm.Weight: 3.63kg.Porta-Nails Angled Nailer With Mallet In Case.

The Einhell Power-X-Change Starter Kit, contains the following: 1 x Power-X-Change 18 Volt Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, deeply discharged battery will be charged in repair mode). Input Power: 240 Volt.Output Voltage: 21 Volt.Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min. Weight: 0.5kg. 1 x Power-X-Change 18 Volt 2.0Ah Li-Ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-Ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. Battery Type: Li-Ion.Voltage Supply: 18 Volt.Battery Capacity: 2,000 mAh.Product Weight: 0.4kg.

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.

Steel cut spiral bevel gears provide the highest level of durability and low vibration, increasing user productivity whilst a low profile, jam pot gear case improves gear durability and ergonomics.With an intelligent trigger design and slide in 4.0Ah Li-ion batteries, this models will make the perfect new addition to your toolbox.