Manguera de escape / Conector de tubo para placa de kit de ventana de aire acondicionado portátil

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard. Hardpoint tenon saw with soft-grip handle for user comfort. The ideal choice for fine carpentry and can be used with a mitre box.Size: 300mm (12 in).Teeth 12 tpi

What's in the box:1 Light; Connector Diameter:24; Light Type:Faucet Light; Material:Plastic; Features:Sensor; Net Dimensions:8.55.52.83333; Net Weight:0.016; Listing Date:12/13/2011; Base Categories:Faucet Lights,Lighting,Lighting Fixtures,Home Garden

The Faithfull Fretsaw Blades are perfect for cutting a variety of shapes on most wood and fibreboard. Can also be used with most makes of powered fretsaws and scrollsaws. Spare blades for FAIFRETSAW1 x Pack of 12 Faithfull Fretsaw Blades 130mm (5in) 14tpi

The Stanley Hobby paint brush has pure black bristles and a rust resistant ferrule. The yellow polypropylene handle is shaped for comfort.This Stanley Hobby Paint Brush Set contains everything you need in 1 complete set of pure bristle paint brushes. You can get all the odd jobs around the house done in no time with this set, from the smallest 12mm (1/2in) for around window frames, dado rails etc. to the largest 75mm (3in) for doors, small wall areas or cupboard doors giving them a new lease of life. Contains: 2 x 12mm (1/2in) Brushes2 x 25mm (1in) Brushes3 x 38mm (1.1/2in) Brushes2 x 50mm (2in) Brushes1 x 75mm (3in) Brush

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Quantity:1; Theme:Holiday,Birthday; Type:Dreamcatcher; Material:Plastic Metal; Shipping Weight:0.52; Net Weight:0.47; Listing Date:12/06/2021; Production mode:External procurement; Size:13.585