Performance Ball 2 lbs.

K-1 is the new integral helmet from AGV, the successor to the K-3. The helmet is ideal for those looking for a sporty design and good value for money. Features
Outer shell made of thermoplastic resin, high strength and very light 2 outer shell sizes for a perfect fit EPS (inner shell) in 3 sizes and 4 densities, for optimal shock absorption The shape of the helmet has been designed to reduce the forces of impact on the collarbone The ventilation system consists of air intakes top, in the chin rest and has a spoiler on the back with exhaust fans excellent aerodynamics and optimal cooling inside. The ventilation was optimized with the help of CFD (Computational Fluid Dynamics) The new rear spoilers have been tested in the wind tunnel, provide high aerodynamics and stabilize the helmet at high speeds XQRS (X-tra Quick Release System): replacement of the visor without tools and in a few seconds possible Lining without stitching on the most sensitive areas Sanitized (antibacterial) lining, 2Dry (for excellent absorption of moisture) and Microsense The removable lining is removable and washable Padded side panels optimized for wearers of glasses Locking system with buckle Weight: 1.49 g +/- 50 gr (in size MS)

Robuste Olympic Hex Bar 42 x 64 cm L/B aus Stahl, ideal geeignet f

The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently and impresses with its elegant design, numerous technical features and a huge selection of colors and decors. Its compact dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism and much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell
Polycarbonate shell 2 outer shell sizes 6 inner shell sizes
Visor
Scratch resistant treatement on both sides Ready for Pinlock Quick release shield system
Vision protection system
Scratch resistant and fog resistant treatements on both sides UV 400 protection
N-Com compatibility
Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS - Emergency Stop Signal N-com keypad adapters
Ventilation system
Airbooster technology Top ventilation Chin guard air intake Rear air exhaust
Retention system
Microlock²
Comfort padding
Removable and washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll
other Features
Wind protector Top helmet bag Protective hard coating on the vanish
Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system.

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

EnduroGuard is compact, lightweight and highly effective at stopping mud and spray blurring your vision. It’s versatile design fits both the front and rear of the bike and is perfect for any mountain bike discipline. Manufactured from a custom thickness Polypropylene, EnduroGuard is extremely durable and offers a superb fit. Unlike other guards of this kind, EnduroGuard features SealGuard which helps prevent mud and water sitting on your fork seals helping to prolong their life and service intervals.Available in 2 sizes and 10 coloursStandard size - Fits forks from 80mm to 120mm. Ideal for 4X, Cross County and short travel trail bikes.Large size - Fits forks from 130mm to 200mm. Ideal for Gravity Enduro and Downhill bikes.Versatile design allows for front and rear fitmentSeal Guard Technology to keep seals cleanSupplied with bright white zip tiesDesign, manufactured and packaged in the UK.

ENERGY MODE PACK! Mit Deinen kreativen Moves beweist Du Dein Können auf dem Platz. Der adidas Nemeziz 18.3 AG gibt Dir den sicheren Sitz, den Du brauchst, wenn Du mit Deiner Agilität über Sieg oder Niederlage entscheidest. Sein flexibles Obermaterial aus Mesh ist angenehm weich und gibt Dir ein reaktionsfreudiges Ballgefühl. Seine leichte AG Außensohle garantiert außerdem optimalen Halt auf Kunstrasen.ENERGY MODE PACK: Kreative Farben für die ultimative Bühne des großen Fußballturniers im Sommer 2018!Eigenschaften: Obermaterial: Synthetik und TextilInnenmaterial: Textil Material Decksohle: Schaum mit Textil-Oberfläche Material Laufsohle: TPU (Thermoplastisches Urethan) Verschluss: SchnürungPassform: Normal geschnittenÜberragendes Ballgefühl: Das innovative Agility Mesh Obermaterial garantiert reaktionsfreudiges Ballgefühl und optimale Ballkontrolle ab dem ersten TragenDeine Agilität bestimmt das Spiel: Agility Mesh für reaktionsfreudiges Ballgefühl; Bandagenkonstruktion für Halt und FlexibilitätEinteilige Konstruktion mit Schnürung mit elastischen Bereichen am EinschlupfFersenpolster für ein weiches Tragegefühl Die Innensohle bietet hohen Tragekomfort bei gleichzeitiger Belüftung (nicht herausnehmbar)Die AG Außensohle (Artificial Grass) ist speziell für Kunstrasen geeignet