Faithfull Slotted Parallel Soft Grip Screwdriver 200mm x 5.5mm

These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Galvanised 40mm Bag Weight 500g

The DEWALT DT70548T 3in Impact Rated Bit Tip Holder comes with 3 bits that are specially designed to have an increased life, the Optimized Torsion Zone allows the bit to flex rather than break, even when used in extreme applications. The contoured area of the tip flexes with the torque of the impact driver. Includes: 1 x 25mm Phillips Bit: PH2.1 x 25mm Poziriv Bit: PZ2.1 X 25mm Torx Bit: T20.

The Porta-Nails Angled Nailer has a lightweight, durable design. To guarantee that the nails are set properly each time, the ratcheting ram allows for single or multi-hits. The multi-hit function helps to minimise fatigue whilst providing greater impact. Interchangeable shoe attachments (not included) provide multiple flooring options. The nailer is supplied with:Extension handle.Mallet.Angled shoe for 5/8in - 33/32in tongue and groove flooring.Wrenches.Rugged carry case. Specification Fastener capacity: 100 x 16 Gauge 'T' Cleats.Operating pressure: Manual.Dimensions: 387 x 457 x 76mm.Weight: 3.63kg.Porta-Nails Angled Nailer With Mallet In Case.

These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.Available in standard sizes, from 25mm to 150mm. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Round Head Nail Galvanised Finish 100mm Bag of 500g

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The Bosch S1122BF Blades are part of the "Flexible for Metal" range.  - Bi-M, Side Set & Milled - For Thick Sheet Metals (3-8mm), Solid Pipes & Profiles (up to 175mm diameter) Specification: Total Length : 225mm Tooth Spacing : 1.8mm / 14TPI