Ridgid BC210 Top Screw Bench Chain Vice 6-60mm Capacity 40185

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

ABUS Diskus 26 series padlocks have a pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull & manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks.'Deep Weld Technology' which offers maximum case strength. Where to use it: High security requirement in severe weather conditions The shackle is manufactured from hardened steel alloy and is protected in a stainless steel body. Key operated, key retaining (a key is needed for locking. Lock retains key until locked) The anti-cut plate provides 360 degree protection from sawing while a top quality welded seam secures against impact attack. Overall diameter: 71 mmOverall depth: 30 mm Shackle width: 19.5 mm I.D.Shackle height: 17 mmShackle Dia: 10 mm

15 unids / set 6mm-50mm Diamond Coated Hole Saw Taladro Bit Cutter Core Shaft Tool Kit para cerámica de vidrio de porcelana de mármol 6/8/10/12/14/16/18/20/22/25/26/28/30/40 / 50 mm

These Faithfull Padlocks have a brass body and steel shackle. They have a self-locking action. These Faithfull brass bodied padlocks provide an excellent level of security. Each lock features a high strength, brass cylinder mechanism that is accurately machined, durable and rust resistant. They have stainless shackle springs and a steel shackle. All locks above 30mm in body size have hardened anti-cut and saw resistant shackle with double locking tongues for improved security. Each pack is supplied with 3 keys.The FAIPLB20 Brass Padlock is suitable for use in low security applications such as luggage, lockers and toolboxes. It features a 4-pin tumbler locking mechanism and has the following specifications: Overall Width: 20mm.Internal Shackle (WxH): 10.7 x 11.1mm.Shackle Diameter: 3.3mm.

Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.

The Bahco 2600-22-10P Superior Handsaw has a thicker blade than conventional handsaws and is developed according to the scientific ERGO™ process. Hardpoint teeth with a black, friction reducing coating. Handle is of 2-component construction with softer plastic in the grip area. Gives very fast cutting on modern medium-hard materials such as chipboard or plastics. Length: 550mm (22in)TPI: 9