Free
Support
These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.50mm Box 100
The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.The Britool BRIE113229B Combination Spanner 5.5mm has the following dimensions:Size: 5.5mmLength: 93mmWeight: 15g
Comes with a dust blower, which clears dust and debris from the cut line. The efficient dust extraction port minimises airborne dust particles when connected to a dust extraction unit. The circular saw has direct compatibility with the DEWALT AirLock system for easy, secure connection to extraction hose.
Powdered chalk for refilling chalk line reels.Food Grade Calcium Carbonate Chalk, colour fast and resistant to damp conditions. The twist lock cap on the container makes it easy to use.Colour Red: For exterior masonry work,/indeliable in use.Size. 2.5lb/1Kg
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M5EURT has the following specifications: 2 x 50mm Excell™ laminated steel padlocks - 38mm Octagonal boron carbide shackle, 9mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike