Free
Support
Description:1. Direct replacement to your original2. Plug-and-play, direct fit, easy installation3. Improved heat sink and charging capabilities4. Higher grade of electric components.Specification:Product Name: Voltage RegulatorMaterial: MetalPlasticColor: BlackWidth : 10cmLength : 11cmHeight : 5cmFixation holes center to center : 8.2cmWires Length: 61cm144cmNumber of plugs : 3Number of pins : 3Number of wires: 5Minimum Charging Voltage: 14.5 V +/- 0.5 VMaximum Charging Current: 50 A / 500 WOpen Circuit Voltage: 15 VOperation Temperature: -20℃ to 85℃Fitment:For Polaris Hawkeye 325 -- 2015For Polaris Scrambler 1000 XP -- 2014-2016For Polaris Scrambler 1000 XP Euro -- 2015For Polaris Scrambler 850 -- 2014-2016For Polaris Scrambler 850 Euro -- 2014-2015For Polaris Sportsman 1000 XP -- 2015-2016For Polaris Sportsman 325 ETX -- 2015For Polaris Sportsman 450 HO -- 2016-2018For Polaris Sportsman 550 -- 2010-2014For Polaris Sportsman 550 Forest -- 2011-2014For Polaris Sportsman 550 Touring -- 2011-2014For Polaris Sportsman 550 XP -- 2014For Polaris Sportsman 570 -- 2014-2018For Polaris Sportsman 570 Touring -- 2014-2018For Polaris Sportsman 850 -- 2015-2016For Polaris Sportsman 850 Forest -- 2012-2014For Polaris Sportsman 850 High Lifter -- 2016For Polaris Sportsman 850 Touring SP -- 2015For Polaris Sportsman 850 XP -- 2010-2014For Polaris Sportsman 850 XP EPS INTL -- 2010, 2012-2015For Polaris Sportsman X2 550 -- 2011-2014For Polaris Sportsman X2 570 -- 2015-2018For Polaris Spor
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Specification:Product Name: Hydraulic Rear Disc Brake CaliperColor: Gold and BlackMaterial: MetalHydraulic Cable Length: Approx 48cmDistance Between Master Cylinder Mount Holes (centre hole to centre hole): 40mm50mmNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included, professional installation is highly recommended.4. The compatibility is just for reference. Please compare the part No.with your original one before purchasingPackage Included:1 X Hydraulic Rear Disc Brake Caliper
Historic shapes and colors meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today’s highest standards. The X3000 carries Agostini’s signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. The iconic piece that gave birth to the AGV logo: the tricolor Agostini helmet, seen from behind, just as his rivals saw it. Same shape, same color scheme, the same leather bag used to transport it, modern technology. Timeless allure in just 3000 limited pieces. Features
Shell in Fiberglass engineered in 3 sizes, EPS structure developed in 3 sizes Visor on-off air vent with channels hollowed in the shell Premium interiors with Genuine leather, Suede fabric and Embroidered logo Fully removable and washable interiors (neck roll excluded) Anti-scratch visor with micro-opening system Double D retention system
Split the grid in the Wireform jacket. The chassis on this three-season jacket comes with slightly pre-curved arms, ideal for the sportbike riding position. Comfort molded neoprene collar, unique reinforced grid chassis, and a full D3O® (shoulders, elbows, and back) package speak to the Wireform’s riding pedigree. Reflective hits provide visibility in low-light conditions, while a removable insulated SatinCore™ liner extends your riding season deep into the fall.
Features
ICON® Sport Fit Material: DynaxTM Ballistic Nylon Chassis Waterproofing: LEVEL : 1 Protectors: D3O® Impact Protectors - Shoulders, Elbows, Back Liner: Insulated SatinCore™ Liner - Removable 3M® Reflective Accents Reflective Thermoplastic Chest Logo Integrated Flex Zones Neoprene Collar Accordian Flex Zones Pre-Curved Arms YKK® Zippers Interior Zipper Slash & Cargo Pockets Streamlined Sportcuff™ Thumb Loops
20m Telescopic Spring Water Hose High Pressure Car Washing Water Hose Home Flowers Water PipeDescription:100% brand new.High pressure.Four output water typesSpray gun can work automaticallyIt has save water, increase pressure and environment characters.Can be widely used on washing cars, vehicles, watering flowers, irrigation, flushing floor, washing wallSpecification:Weight: 1158gSize:20mPacking: color boxNote:Many people will ask: why this water hose can not pull to 15 meters?Actually this is not our false meters, telescopic pipe has coil springs design for accommodating.Generally,10M can be pulled to 9M, 15M to 13M, 20M to 18M. so when purchasing,please buy longer one according to your requirement.Package included:1spring water hose