Free
Support
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
Trilobite Acid Scrambler, leather-/ textile jacket
RADIANT REVEAL PACK! Dominating Touch beginnt in Dir! Sichere Passform. Unvergleichliches Tragegefühl. Der Nike Tiempo Legend VI SG-Pro bietet federleichte Stabilität und präzise Kontrolle auf feuchten und schlammigen Rasenplätzen. Der rutschfeste Sitz, die Konstruktion ohne Zunge und das weiche, wasserabweisende Känguruleder sind weitere Pluspunkte dieses Modells. Spezielle Technologien verhindern das Rutschen und das hochwertige Leder lässt Dich das Spielfeld dominieren. Seit mehr als 20 Jahren ist der Nike Tiempo ein Synonym für Fußballschuhe aus Premiumleder. Der neue Nike Tiempo Legend 6 führt diese Tradition fort und besticht durch seine innovative Verarbeitung, die für eine hervorragende Ballbeherrschung ausgelegt ist. RADIANT REVEAL PACK - Für eine strahlende Performance!Eigenschaften: Obermaterial: KängurulederInnenmaterial: Känguruleder und TextilMaterial Decksohle: Schaum mit Textil-OberflächeMaterial Laufsohle: TPU Sohle Dicke: 35 mm hinten / 20 mm vorn (inkl. Stollen) Verschluss: Schnürung Passform: Fällt normal aus Wird mit Nike Fußballbeutel im Tiempo Style geliefertNeuartiges und schnelltrocknendes Tiempo Adaptive KängurulederPerfekte Passform: Das Obermaterial aus erstklassigem Känguruleder wird innen von einem neuartigen Mittelfußkäfig gestützt, der für unvergleichlichen Halt und weniger Rutschen sorgtDominating Touch: Känguruleder mit All Conditions Control (ACC) sorgt für ein noch nie dagewesenes Ballgefühl und permanente Kontrolle bei nassen und trockenem WetterDie Nike All Conditions Control-Technologie, kurz ACC, sorgt dafür, dass Fußballschuhe auch bei Nässe dasselbe hohe Niveau an Griffigkeit, Ballgefühl und Ballkontrolle bieten wie bei trockenen Verhältnissen. Möglich wird dies durch eine spezielle Behandlung während der Herstellung des Obermaterials, die bei allen Bedingungen ein gleichbleibend gutes Gefühl für den Ball gewährleistet. Überall, wo Fußball gespielt wird, spielt auch das Wetter eine Rolle. Vor allem bei Regen wird es sogar für die besten Spieler schwieriger, Pässe zu spielen und Bälle anzunehmen. Nike All Conditions Control (ACC) sorgt dafür, dass das Obermaterial des Fußballschuhs auch bei nassem Wetter dieselbe Reibung zwischen Schuh und Ball gewährleistet wie bei trockenen Verhältnissen, was dem Spieler auch bei Regen optimale Ballkontrolle ermöglicht. Der Wunsch nach Schuhen, die auch bei nassen Verhältnissen ein hohes Maß an Ballkontrolle ermöglichen, wurde von vielen Spielern an Nikes Design-Team herangetragen, so auch von Andres Iniesta vom FC Barcelona. Nikes Fußballschuhe vereinen topaktuelles, innovatives Design mit ultimativer Performance und bieten für jede Spielweise das richtige Modell ´Tiempo-Spieler starten den Angriff´, so Vianney De Montgolfier, Nike Football Designer. ´Sie sind abhängig von Ballkontrolle und Präzision. So haben wir uns bei der Entwicklung des Tiempo Legend 6 die Aufgabe gestellt, klassische Materialien auf eine völlig neue Weise zu verarbeiten.´´Dank des neuen Designs fühlt sich der Tiempo wie ein gepolsterter Schuh an, ohne jedoch beim Leder Abstriche zu machen´, führt Mongolfier weiter aus. ´Die gepolsterte Kappe wurde im Vakuum auf das Leder gepresst, um eine weiche, nahtlose Konstruktion zu ermöglichen. Durch den Verzicht auf gesteppte Materialien, reduzieren wir die Möglichkeit, dass Matsch oder Wasser durch die gesteppten Nähte eindringt, was zu einer Verhärtung des Leders führen kann.´ ´Der Tiempo Legend 6 ist ein moderner Klassiker´, fasst Montgolfier zusammen. ´Der Schuh hat Kultstatus. In ihm bilden klassische Materialien und Ästhetik eine Einheit mit zukunftsweisender und innovativer Handwerkskunst.´Tiempo-Fußballschuhe sind seit jeher mit einer gepolsterten Zehenbox aus Leder versehen. Für den Tiempo Legend 6 wollte Nike ein Tragegefühl erzeugen, das sich an einem geschmeidigen Material orientiert, ohne dass das Leder dabei zu stark perforiert wird. Der neue Schuh ist im Inneren mit einem dämpfenden Gerüst ausgestattet, das seine Form dauerhaft hält.Ein weiteres legendäres Merkmal des Tiempo - die Zunge - wurde ebenfalls im Hinblick auf eine bessere Leistung modernisiert. Beim Tiempo Legend 6 bleibt die klassische Silhouette mit der Lederzunge erhalten, wobei diese nun aus einem Stück gefertigt und in die Schnürung integriert istDer Schuh ist im Inneren mit einem Gerüst im Mittelfußbereich, einer vorgeformten Fersenkappe und einer Einlegesohle aus Mikrofaser versehen, wodurch der Fuß in einer optimalen Position gehalten wirdDie Einlegesohle ist zudem sehr griffig, da sie an der Unterseite mittels Silikonnoppen mit der Schuhsohle verbunden istKonstruktion ohne Zunge für eine anliegende, den Fuß umschließende und sichere PassformVorgeformte EVA-Einlage mit Poron®-Einsatz bietet Halt und DämpfungTechnisch ausgereifte Einlegeteilsohle für einen weichen Übergang und Flexibilität von der Ferse bis zur ZehenspitzeDie Innenseite des Schuhs ist leicht höher gesetzt als die Außenseite, um sich der Anatomie des Knöchels anzupassenDie Fersenkappe des Tiempo wurde speziell für einen optimalen Sitz und Tragekomfort entwickeltUm auf die Tradition hinzuweisen, wurde die Rückseite des Schuhs mit einem großen Tiempo-Schriftzug versehenDie Swooshes auf der Innen- und Außenseite umschließen den Schuh im Bereich der Ferse nahezu, ohne sich jedoch gegenseitig zu berührenPerforiertes Lederfutter an der Ferse sorgt für höchsten Tragekomfort Die Kombination aus kegelförmigen Stollen und direkt eingespritzten Stollen maximiert Bodenhaftung und verteilt dabei auch den Stollendruck gleichmäßig Um optimale Bodenhaftung und Halt zu garantieren, besteht das Traktionsmuster an der Außensohle aus einer Kombination aus kegelförmigen Stollen unter dem Vorderfuß und länglichen Stollen im Fersenbereich Außensohle: Leichtes TPU mit zweckmäßigem Stollendesign bietet hervorragende Flexibilität, außerordentliche Traktion und unvergleichlichen Komfort ein ganzes Spiel lang Durchgehende TPU-Sohle für mehr Strapazierfähigkeit und Stabilität Im Lieferumfang enthalten: Ein Stollenschlüssel und zusätzlich 12 Ersatz-Metallstollen: 4 Stück 15 mm, 8 Stück 13 mm werden in einer praktischen Kartusche mit Schraubverschluss mitgeliefert 4 fest angebrachte FG-Stollen aus TPU schneiden sich förmlich in den Rasen und unterstützen so spielentscheidende Richtungswechsel 6 auswechselbare Metallstollen: 4 Stück mit 11 mm und 2 Stück mit 13 mm Länge SG-Sohle (Soft Ground): Geeignet für tiefe, natürliche Böden. Mit 6 Schraubstollen aus Aluminium und 6 fest angebrachten FG-Stollen
The Alpinestars Tech 8 RS continues the legacy of continuous development and improvement started in the mid-1990s, and combines premium materials and innovative design for a boot with unrivalled levels of safety and performance. A breathable inner ankle sleeve and class-leading closure system enhances comfort and fit when riding the toughest tracks, while Alpinestars dual density sole is further developed for durability and is easily replaceable.
Features
Upper constructed from a combination of full grain leather and innovative and light microfiber that is flexible and abrasion resistant. Alpinestars inner ankle sleeve is constructed from leather with 3D mesh panels and incorporates adjustable shock absorbing gel inserts on the ankles and a removable anatomic footbed for enhanced comfort, fit and protection on the ankle and lower leg. Alpinestars exclusive high grip, dual density rubber outsole includes footpeg area which is reinforced with hard polymer compound for durability and comfort. The outsole is fully replaceable. Reinforced lateral flex zone above outward facing ankle helps prevent torsion. Contoured shin plate injected with high modulus polymer for superior impact and abrasion resistance is perforated for ventilation. Contoured calf protector plate is injected with high modulus polymer for impact resistance. Extended, internal protection plates constructed from injected polymer to guard the ankle and lower foot as well as the toeâbox area. Advanced closure system features strong techno-polymer buckles for easy adjustability with a precise, secure and streamlined fit. Top and bottom reverse closure design provides superior impact security and improved fit. Low profile toe for improved control and sensitiveness in the shift area. Fullâlength, sculpted rubber panel on the inner side of the boot gives superb grip against the bike and is insulated with aluminum foil for improved heat resistance. Instep and Achilles flex zones for superior comfort, control and support. Replaceable kick starter protection insert located on the right boot. Stamped steel sole and heel guard. Soft, polymer gaiter provides effective seal around the top of the boot, preventing excessive water and dirt entry. Breathable 3D tech mesh lining reduces heat buildup and improves comfort. Contoured tempered steel shank is over injected inside the midâsole assembly for rider safety and support.
The Bluemels mudguard set comes in two colours (silver & black). Matt black and reflective versions are also available.• 45mm wide with fixed bridges• 3mm stainless steel stays• Front angle, sliding bridges and fixed bridges made from stainless steel• Security fastening ASR joint, angle adjustableWheel Size: 20”, 28” (700c)Fastening: ASR clipSKMBM3528B - 700C x 35mm blackSKMBM35286 – 700C x 35mm silverSKMBM4228B - 700C x 42mm blackSKMBM42286 – 700C x 42mm silverSKMBM4520B - 20” x 45mm blackSKMBM4528B - 700C x 45mm blackSKMBM45286 - 700C x 45mm silver
Quality first! Fast shipping! More Qty more discount! Mix order available! Drop shipping available! Logo, Name and Number are stitched! Welcome to Retail and Wholesale!
