Herramienta del cerrajero profesional abrelatas rápido de Ganzúas para cerraduras fuertes

The Sievert Cyclone Torch Kit fitted with a cyclone burner for rapid pipe soldering and brazing. Fits all standard propane cylinders and is suitable for plumbing and engineering applications. Contains the following: 1 x 3486 Handle.1 x 3524 Cyclone Burner.1 x Hose Failure Valve.1 x 4 Metres of LPG Hose.

DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3133 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 10.

Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 38mm.Cutting ;Capacity: ;Piano: ;1.4mm, Hard: ;2.0mm.Weight: 252g.

Janitol Florafresh is a fragrant disinfectant cleaner, specially formulated to clean and disinfect toilets, urinals, floors, walls, wash basins, shower cubicles and refuse areas. Removes the cause of malodours and is suitable for use with cloth, mop, hand sprayer or pressure washers.

Delivering extremely low vibration levels, the DeWALT D25414KT uses active vibration control with a floating back handle, which increases user comfort and safety whilst allowing for extended periods of work. Featuring a rotation-stop for light chiselling applications, render and tile removal, the electronic variable speed switch provides total control for users, while the optimised power to weight ratio provides good power in light weight package.Guaranteeing flexibility, precision and speed, the D25414KT  includes not only a quick change 3 jaw chuck, but also an impact stop for drilling/screwdriving through wood, steel and ceramics. It also features an industrial quality SDS-Plus Chuck with a capacity up to 32mm in concrete.

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200