Free
Support
Specification:Handle Material: AlloyWrench Shaft Length : Approx. 14.6cm/ 5.7Chain Total Length: Approx. 44.5cm/ 17.5Max Usable Chain Length: Approx. 38.5cmFitment:For removing all oil filters up to 12cm diameterHow To Use:The chain is simply located around the filter and turned the chain will tighten to the diameter of the filterPackage Included:1 X Oil Filter Wrench
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
KLIM® - THE LAYERING COMPANY KLIM® engineers a complete array layering solutions for every possible outdoor condition, specifically designed for the rigors of powered and unpowered outdoor activities. The KLIM® TETON MERINO WOOL BASE LAYER is the ultimate layering option for your outdoor adventure on motorcycles, snowmobiles or any other outdoor activity. Built with a KLIM®-specific 80/20 formula of Merino wool/nylon, TETON MERINO WOOL offers an industry-first complement of everyday functionality including multi-day odor resistance, warm and cool reactive temperature regulation, comfort and breathability. The ultimate every day multi-tool layer.
ideal for shaving, cutting and texturising faster, easier and safer blade change comfort cut blade length 50mm includes 10 blades and attachable comb
Angenehmes Fleece-Futter an der BundInnenseite Stretch-Einsätze für absolute Bewegungsfreiheit Optimale Temperaturregulierung dank Belüftungssystem Robuste Dreifach-Steppnähte SAS-TEC Protektoren an den Knien. Tasche für optionalen Hüftprotektor Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Wachsbeschichtung für noch mehr Strapazierfähigkeit Zweilagiger Stoff für noch mehr Strapazierfähigkeit am Saum Reflektierende Elemente für perfekte Sichtbarkeit Anti-Rutsch-Einsatz im unteren Bereich 76cm-Verbindungsreißverschluss 2 Außentaschen 1 Cargotasche Extra robustes, farbiges YKK FlexFix® avant Druckknopfsystem Verschluss mit Druckknopf und Haken Verstellbarer Bund und Saum
Specification:Product Name: Hydraulic Rear Disc Brake CaliperColor: Gold and BlackMaterial: MetalHydraulic Cable Length: Approx 48cmDistance Between Master Cylinder Mount Holes (centre hole to centre hole): 40mm50mmNote:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included, professional installation is highly recommended.4. The compatibility is just for reference. Please compare the part No.with your original one before purchasingPackage Included:1 X Hydraulic Rear Disc Brake Caliper