Free
Support
ABUS Rock 83CS/55mm open shackle heavy-duty fully re-keyable through hardened steel alloy padlock, with a ball bearing locking mechanism for extra security, has a tough through hardened steel alloy shackle as standard with NANO PROTECT™ Chrome Plating, helping to make rusty shackles a thing of the past. Can be adjusted to operate key retaining or no key retaining, automatic locking or key to lock. Where to use: The 83 series range of padlocks offer a medium to high level of security, with the ability to offer various levels of security within one keying system and is suitable for internal or external use.Width : 55mmHeight : 103.5mmDepth : 25mm Shackel Width : 25mmShackle Height : 38.5mmShackle Diameter : 11mmSecurity Level : 8
Shape:Round; Type:Hand Shower; Style:Contemporary; Finish:Chrome; Spray Function:Jet,Soft,Massage; Connection Standard:G1/2; Shower Hose Included:No; Slide Bar Included:No; Shower Arm Included:No; Material:A Grade ABS; Features:Shower,Water-saving,Rainfall,Multi - mode; Net Weight:0.08; Listing Date:10/16/2020; Production mode:Self-produce
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
Steel cut spiral bevel gears provide the highest level of durability and low vibration, increasing user productivity whilst a low profile, jam pot gear case improves gear durability and ergonomics.With an intelligent trigger design and slide in 4.0Ah Li-ion batteries, this models will make the perfect new addition to your toolbox.
The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts. The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability. Specification: Input Power: 1,300 Watt.No Load Speed: 1,750-4,000/min.Blade: 165 x 20mm Bore.Bevel Capacity: 47°.Depth of Cut: @90º: 59mm, @45º: 44mm.Depth of Cut With Guide Rails: @90º: 55mm, @45º: 40mm.Length: 303mm.Height: 265mm.Weight: 5.1kg. The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300 Watt 240 Volt Version.