Free
Support
Hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. Controllable via DMX. Can also be used with EZ Kling interface for KlingNet /LED Master or Artnet control. Link multiple panels together via powerCon input/output with RJ45 ports for DMX linking. Panels lock together with an easy to use quick release panel lock (one-panel lock included per panel). Rigging bars are also available for dead hang installation (m10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe). To be able to set the DMX-address and channel mode, you need the 3D Vision encoder (1226300061). Technische Daten 3D LED Effect panel. Use in multiples to create a dynamic Modular connecting system allows you to create different configurations Quick lock rigging system allows you to assemble and disassemble quickly 10mm thread on rear for standard Pro Clamp, truss mount Control Protocol: DMX. ArtNet/KlingNet via EZ Kling Data Connections: DMX Protocol via Ethercon, Input, and Output Product Size: 15.8\" x 15.8\" x 2.7\" (400 x 400 x 68mm) LED Quantity, per unit: 72pcs. LED Type: 5050 SMD, 3in 1 Power Connections: Powercon, Input, and Output Max Power Consumption: 13W Input Voltage: 100-265VAC Net Weight: 6 lbs. (2.74kg) Face Material: Frosted Whtie Acrylic Viewing Angle: 180-degrees Working Temperature: -4 to 140 F (-20 to +60 C) Working Lifespan: =50,000 Hours
Der WSX-1 DMX-Transceiver ist ein benutzerfreundlicher ?Ein-Knopf? Transceiver, der es dem Nutzer ermöglicht, 512 DMX-Kanäle (ein Universum) kabellos mittels W-DMX von Wireless Solution zu übertragen. Per Knopfdruck kann entschieden werden, ob der WSX-1 als Sender oder Empfänger arbeitet. Mit zwei WSX-1 ist es somit auch möglich Repeater zu bauen und den Sendebereich bis zu unglaublichen 3200m zu erweitern. Auch bereits bestehende Wireless Solution- Systeme können problemlos mit dem WSX-1 betrieben werden. Für alle Fälle kann der WSX-1 optional mit einem 12Ah Akkupack betrieben werden. Eigenschaften: Spannung AC 90-250V / 50-60Hz Anschluss Powercon in/out, DV 12V 4 Pol XLR für Netzteil o. Battery Pack, 5 Pin XLR in/out DMX, 3 Pin XLR in/out DMX, RJ45 DMX in/out Maße (L/B/H) 160 x 200 x 73 mm Gewicht 1,1 kg
Features: Solar-powered: charge itself during the daytime, and light up automatically in darkness. Motion sensor: automatically illuminate when motion is detected within 10-11 feet of the device in the dark with a PIR sensor. And the light will dim after 30 seconds of inactivity. Two working models: full brightness model and lower brightness model. When the motion sensor detects the movement, the lamp will double the light output. And to save the power, it dims after about 30 seconds to a lower brightness. Energy saving: no cables, no electricity cost, recharged by solar panel under sunlight. High-efficiency: efficiently transform solar energy into electrical energy by absorbing sunlight. It can continuously work 6-8 hours after fully charged with about 6 hours in sunlight. PP housing cover:water-resistant, dust-resistant. Suitable for outdoor using. Flexible installation: two installation ways, quick, easy.
Features: Solar-powered lights with 10 pieces of white LEDs. Designed with polycrystalline solar panel, automatically get charged during the daytime (enough sunshine), and light up at night. High energy conversion rate and environmental friendly. Easy operation on ON/OFF/AUTO switch, and specific light-control system makes sure that the LEDs only light up in darkness. Night sensor function that it will auto turn dim light when in darkness or at night, and auto turn off when in daytime or bright area. When people walk around 2 meters close it will turn on bight light. Rechargeable 3.7V/800mAh li-ion battery. Ideal for illuminating paths, decks, docks, boats, driveways, stairways, pavements, etc. Can be installed under the roof or fixed on the wall in your garden, gives you a good view and safety of your garden at night.
Features: SOLAR POWERED: this solar-powered LED Bulb relies on solar energy, which is clean, endless and environment-friendly. INDOOR OUTDOOR USE: independent bulb and solar panel, the solar panel can be fixed in the roof or a place with sufficient sunlight with 3 meters cable(long enough) forcharging and the bulb can be carried to anywhere you want after charging, so it is suitable for home emergency use and outdoor use such as hiking, camping, fishing, beach tentetc. 2 CONTROL MODES: the bulb can be controlled by the switch button and remote controller and you can also choose auto on / off by pressing the button to DC or choose manual control by pressing the button to AC. Moreover, you can control the bulb with remote controller under the AC or DC state, simple operate and convenient to use. 3 LIGHTING MODES BRIGHTNESS: it has 3 lighting modes for your option: full brightness(22 LED light), 8 LED light, 14 LED light, so you can choose the brightness as your need,smart to use. APPLICATION SCENE: it's suitable indoor or outdoor use such as home emergency, fishing, hiking, camping, beach tent, etc.
Quantité:1pc; Couleur de Lumière:Blanc Chaud; Type de LED:LED Haute Puissance; Quantité de Perles LED:3; Tension (V):220-240; Lumens:500-550; Couleur de Température:3000-3500; Durée de Vie:> 30000; Couleur:Clair; Angle de Faisceau:30 °; Consommation:6; Gamme de Puissance:5.5-6; Fonction Première:Chambre,Cuisine,Chambre des Enfants,Maison / Bureau; Certification:CE,RoHs; Puissance incandescente équivalente:80; Matériau:Plastique,Aluminium; Garantie du Fabricant (année):2; Taille du Trou (mm):75; Marque:ZDM; Caractéristiques:Intensité Réglable; Poids Net:0.08; date d'inscription:09/04/2014; Mode de production:Auto-produit; Catégories de base:Ampoules LED,Ampoules électriques,Eclairage,Maison Jardin; Pays populaire:Italy,Néerlandais,Allemagne; Produits spéciaux sélectionnés:COD
