IXS X-Tour Montevideo-ST Motorrad Textilhose Schwarz M

The Globe has no other claim than to provide the minimum of protection essential to the practice of any two-wheeled activity (motorcycle, scooter, bike). Its simplicity makes it comfortable to wear and has quickly become the universal basic glove of reference. Lightweight while incorporating PU protective shells on the top of the hand and in the palm, it offers a satisfactory compromise between pleasure and safety. A simple glove, practical and very affordable.

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

rejuvenates and moisturises mattifies and blurs anti-pollution fragranced with green tea extract vegan friendly

* Tech-Air® 5 is a slim, self-contained wearable airbag vest that can be worn under any proper fitting textile jacket or Tech-Air® compatible jacket. * Tech-Air® 5 offers unrivaled upper body protection, keeping motorcycle riders safe by uniquely covering the shoulders, chest, ribs and full back. * Tech-Air® 5 has Bluetooth connectivity and an accompanying Tech-Air® App, which uses the rider’s phone to display the system’s operational status, battery status and a detailed analysis of a ride. | Article: Alpinestars Tech-Air 5 Airbag Vest, grey, Size S | Article: Alpinestars Tech-Air 5 Airbag Vest, grey, Size S, grey, Size S

Don’t let treacherous weather conditions slow you down. Let us do the goggle building for you. The Mud Strata comes prefabricated with our Speedlab Vision System professionally installed straight out of the box. Now you can immediately attack a muddy moto with the confidence of having clear vision. Features
Pre-built with Speedlab Vision System to tackle the muddiest conditions. Curvature suited for comfort and great field of vision. Increased vent foam density aiding in keeping the elements out. Anti-fog, scratch resistant Lexan® lens for unimpaired vision complete with tear-off pins. 40mm silicon coated strap holds your goggles in place in wet conditions. Constructed out of flexible yet durable urethane featuring combined matte & gloss finish.
Which lens should I choose? Click here for the lens selector on manufacturers page »

Description:1.LED spot light can be rotated 180 degrees and 360 degrees.2.This LED reading light provides soft and even light distribution in a low power consumption.3.Perfectly light up your bedside, reading desk or where a multi-angle illumination is needed.4.This lamp gives a new flair your chosen living space with modern design.5.Just install the light on the surface with screws.Specification:Product Name:LED reading lightMaterial:AluminumHousing Color:ChromeVoltage: 12-24VPower:1WLED quantity: 1Lighting color: Warm light/Natural Light/White LightColor temperature : 3000K(Warm light)/4000K(Natural Light)/6000K(White Light)Switch: Button TypeBase Size: 78.9*31.6mm(L x H)Lamp head size: 63.8mm long x 24.6mm diameterApplication:For kitchen / bedside / reading desk / RV / caravan / truck / boat etc.Quantity:1 SetNote:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.Instruction is not included.Professional Installation Is Highly Recommended!!If you wantto know how to use or install it,please contact us by Email.We will provide help as much as possible.Package Included:1 X LED Reading Light1 X Bracket4 X Screw2 X Expansion Screw