Free
Support
The Union 2101 5 lever mortice deadlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. Deadbolt locked or unlocked by the key from either side. The 2101 features an anti-saw deadbolt and is supplied with covered escutcheon to match forend with the striking plate finished to match forend. Deadbolt Brass, with hardened steel rollersRebate Kit 2988 (13, 19 or 25mm sizes)Keying 600 standard differs (keys are not numbered for security purposes) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass (Striking Plate Security box type, finished to match forend)Case Size: 65mm x 70mm (2.5 in)Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole.Pack: Visi
Superbly made by craftsmen from the very best materials available. The Faithfull FAIASDS is an all steel digging spade forged from carbon manganese steel for extra strength, ideal for transplanting and site work. The metal shaft is fitted with an MYD hilt with a wooden cross dowel for added comfort. It is also fitted with flat treads for comfort, protecting footwear and avoiding slippage. Fully guaranteed for five years. The Faithfull FAIASDS has the following specifications: Blade: 280 x 180mm (11 inch x 7 inch)Shaft: 700mm (28 inch)
Outdoor Camping Self Inflating Mat Portable Inflatable Sleeping Mattress Moisture-Proof Pad
A pack of two Forge traditional Spring Door Stops for wall mounting at low level. Supplied with fittings and fitting instructions.Fitting Instructions:1.Remove fixing plate from spring and screw to skirting at desired position.2. Place spring back against base and turn clockwise so that the spring is rethreaded into the base. N.B. Additional fixings may be required for fitting to solid or hollow walls.The FGEDSSPRICH Door Stops have a long lasting chrome finish, with a rubber cap to prevent marking and damage to the door surface.
A modern tubular alloy pull handle for bolt through fitting to doors which don't require a mortice latch.Supplied with screws and fitting instructions.Fitting Instructions:1: Mark a vertical line on door face approx 75mm from door face on the side of door to which the handle will be installed.2. Measure 2 points on this line for fixing holes dependant on handle size (either 225mm or 300mm apart).3. Use a 8mm drillbit to drill the two fixing holes from the handle side of the door ensuring they are square to the door surface.4. insert the two supplied bolts into the drilled holes from the opposite side and fasten into the handle profile.Length: 300mm.