Dovpo Topside 90W Top Fill Squonk Mod is constructed with food grade Stainless Steel, Zinc Alloy and Aluminum Alloy. The environmental material ensures safety and provide you healthy vaping experience. It is powered by single 21700 battery and can be reached to 90W maximum output. The mod also equips a 10ml silicone e-juice bottle which supports top filling. This is the first top filling squonk mod in the world. 0.96inch OLED display available. TC,VW,Bypass modes can be switchable. Zinc alloy + aluminum alloy + SS construction Food grade stainless steel and silicone 0.96" OLED display screen Top Fill type squonker mod Spring-loaded firing button Built-in 10ml squonk bottle TC range at 100-300¡ãC/200-600¨H Powered by 1 x 21700/20700/18650 (Sold Separately) 510 threading connection Firmware upgradeable Brand: DOVPO Wattage 5-90W Input voltage 3.2-4.2V Output voltage 1-8.5V Resistance range 0.08-3.5ohm Working mode VW, Bypass, TC Squonk bottle capacity 10ml Size 92 x 54 x 27mm
SMOK Alike Pod System Starter Kit is integrated with 1600mAh battery, efficient to bring you a lasting vaping experience with power up to 40W. The 0.001s firing speed is conducive to enhance the immersion when you experience a fast ignition and instant flavor releasing. Teamed with a 5.5ml pod, you can refill it with any flavor of the liquid on the side for diverse experiences. 5.5ml pod that is compatible with all coils of Smok RPM40 kit Tri-proof protection: IPX7 waterproof, dustproof and shockproof Comes with RPM Mesh 0.4¦¸ & RPM DC 0.8¦¸ coil for DL or MTL 1600mah built-in battery with 1- 40W adjustable output wattage Compact size & ergonomic contouring ensure better grip and portability 0.96" color screen, a breathtaking display for a novice or veteran Leather body with an excellent natural texture, suitable for most occasions Size: 88.3 x 43.2 x 23.4mm Capacity: 5.5ml/2ml(TPD-UK) Battery: 1600mAh Output Power: 1- 40W Resistance Range: 0.2-2.5¦¸ Brand: Smoktech Model Alike Output Power 1-40W Pod Capacity 5.5ml
Nicorette Invisi 10mg Patch (Step 3) Nicorette Invisipatch is a discreet, easy-to-use, once-a-day solution to help you deal with the cravings and withdrawal symptoms associated with quitting smoking. It is most suitable for you if you are a regular smoker who smokes throughout the day. How does it work? The Nicorette Invisipatch helps you to quit by delivering a continuous, controlled dose of nicotine into your body to help relieve cravings and withdrawal symptoms. The nicotine is released through your skin over 16 hours. It is absorbed quite slowly compared to smoking a cigarette so you should be prepared to wait a little while longer for the nicotine to get into your system. Directions For your Nicorette Invisipatch to work it is important that you use it properly, so make sure that you read through all the instructions carefully. Do: Apply one fresh Nicorette Patch first thing every morning Remove the Patch before going to bed and dispose of it safely Apply the Patch to a clean, dry, hairless area of skin on the front or side of your chest, upper arm or hip. Do not: Apply the Patch to the same spot of skin two days running Use the Patch on broken or inflamed skin Smoke while you are wearing the Patch. Nicorette Invisipatch Reduction Guide It is important to gradually reduce the amount of nicotine you absorb until you can do without it. If you smoke more than 10 cigarettes a day, then the Nicorette Invisi 25mg Patch is a good starting dose for you. The Nicorette Invisipatch is available in three strengths (25mg, 15mg & 10mg), so you can start on the highest dose and then gradually reduce your intake: Start with the higher strength 25mg full strength patches for eight weeks Switch to the 15mg patch for two weeks Finally, lower the dose to the 10mg patches for a further 2 weeks before giving up all together Or if you smoke less than 10 cigarettes a day, then you should start on the 15mg patch for 8 weeks, then cut down to the 10mg patch for 4 weeks. Remember, if you have any questions or are not sure of anything, please ask your pharmacist or local GP for advice and always read the label.
The newest GeekVape Aegis Legend Kit is a stylish kit designed to be water and shock resistant. Aegis Legend Mod is compatible with dual 18650 batteries powered by the new AS chipset that releases up to 200W output. This is a second to none choice for those who are looking for a durable box mod with extreme power and portability. What's more, the Aegis Legend Kit includes our new Aero Mesh sub ohm tank powered with Super mesh coil system, which brings outstanding flavor and lasts longer! All-new AS Chipset with color display Constructed with six materials for extreme durability Waterproof, Shockproof and Dust-proof for long service life Pass Drop Test Report and IP67 certificate Temperature control: 100-315'C / 200-600'F Houses 2 x 18650 Battery (sold separately) USB charging and firmware upgrade Easy top refill and bottom airflow Mesh 0.2ohm coil for Aero tank Extra 5ml bulb glass tube attached Brand: Geekvape MAX power output 200W Output mode VW/ VPC/TC/TCR/BYPASS Resistance range 0.05-3.0ohm Tank Capacity 4ml Tank Diameter 25mm Size 135.5 x 58.5 x 30.6mm
