This Teng Tools Aluminium Clip Rail is ideal for mounting on a wall or for use in a toolbox, to conveniently store Teng sockets. It is suitable for use with clips for 1/4 inch, 3/8 inch and 1/2 inch sockets, which clip onto the single track rail and which hold the socket in place. Clips NOT included.The TENALU430 Section Rail has the following length: 1 metre.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Rawplug Frame Fixings for fixing timber or metal window and door frames to concrete, stone, brick or blockwork. Quick and easy to use, no marking out, drill straight through frame. Anti rotation lugs prevent rotation of fixing during tightening. Tough nylon sleeve prevents frame distortion during tightening.Size. 10 x 120mm.Maximum Fixture Thickness: 70mmQty. 50.Complete with Screws
128mm 5 "HSS Centro de acero de alta velocidad automático del sacador por resorte Pulse marcador Dent Con Impact ajustable y de acero endurecido Cuerpo
These RIDGID Top Screw Bench Chain Vices are fitted with a crank handle that is firmly anchored to the base of the vice. It also features a pipe rest and bender. The heavy-duty cast iron base has jaws especially designed for gripping and bending pipes.RIDGID BC210 Top Screw Bench Chain Vice Capacity: 6-60mm (1/8 - 2.1/2in).Weight: 3.5kg.
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 160EURD has the following specifications: 60mm solid brass padlock - 30mm hardened steel shackle, 9mm diam. - 5-pins
Ronseal 5 Year Woodstain is independently guaranteed by the BBA to waterproof and protect your exterior wood for a full 5 years. The easy to apply woodstain has been specially developed to give ultimate protection against all types of weather. It keeps the wood dry by preventing excess water from entering the wood whilst allowing moisture inside the wood to evaporate to prevent cracking, peeling, blistering and surface mould growth. Rainproof in one hour. Suitable for bare or previously stained wood, and ideal for doors, window frames, cladding, garden furniture and all smooth planed timber.Ronseal 5 Year Woodstain provides a high satin sheen in the shade of your choice giving a beautiful, durable finish to the wood whilst allowing the natural grain to show through.2 coats is normally enough but untreated wood may need 3. It is touch dry in 1 hour and can be re-coated in 4 hours. Areas of use: Exterior doors and windows. Approx coverage: 20 Litre² covered per litre.Approx number of coats: 3. Finish: Semi transparent Satin.Application: Brush. Drying time Approx: 1 hour.Protection level: Very High. Available in various shades and sizes.Ronseal 5 Year Woodstain is supplied in a tin with re-sealable lid. Colour: Black Ebony.Size: 750ml.
