The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.
Artisanat:Imprimé,Imprimé; Composition:3 pièces (1 housse de couette, 2 housses d'oreiller); Style:Bohème; Matière:Polyester; Type de fermoir:Fermeture; Type d'article:Ensembles housse de couette; Motif:Rayures et carreaux; Date de l'annonce:01/28/2023; Taille de la housse de couette:; Taille de la taie d'oreiller:; Source de données du guide des tailles:Fourni par le fournisseur.
Hammerite Stonechip Shield protects surfaces from Stone Chip Damage, Salt, Damp & Rust. It is tough and durable and remains flexible after application. It will not crack or peel. It is easy to apply, with a non-drip formulation, and is overpaintable with most top coats. It is ideal for sills, spoilers and lower body panels of vehicles. Specification: Colour : Black Size : 600ml Aerosol
