Free
Support
Do you always find it so a fiddle to put on your textile pants over your normal trousers? Do you drive a lot of commuting? Then the Swift is for you! Thanks to its smartly positioned zipper on the side, you can easily put on the pants to protect and dry at work or at home! Features
Made of Poly 600 and R-tech Fixed Raintex membrane so you always arrive dry at your destination Safe Tech protectors on the knee Side Eye boosts your visibility in the dark
The Midland has already been given two thumbs up by the public for its qualities is now evolving, to feature new D30 protectors. Designed in goat leather, approved, waterproof, comfortable and equipped with the Sensitive Science insert, the glove offers every feature youâd expect from Furygan s expertise. Care
Let air dry Clean your garment regularly (once a month) You can use a waterproofing spray for your gloves, as it makes the material more resistant to water and dirt. No chemical cleaning
Specification:Material: MetalColor: SilverSize: Approx. 2x4x11.3mm/ 0.08x0.16x0.44Made of hard metal, these kind of tire stud screws are strong and durable in use.It has a low ground pressure and it is environmentally with minimum impact.It is easy to install with certain drill and can match well with your vehicle tires.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread.This kind of screws are suitable for most of tires and add ultimate off-road capacity to your ordinary car, truck,motorcycles,etc. It brings a good anti-slip property for your tires.Installation:1. Drill (using a very small bit) down from the center of chosen knob into the tire.2. Drill a screw up from inside to out. If the angle isnt perpendicular to the tire, it will stick out one side or the other.Do one hole and screw at a time.3. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two layers of tape.Package Included:100 X Tire Stud Screws
It was thought that the award-winning Sidi Rex Corsa shoe was the pinnacle of recreational boat technology. To this day, Sidi is proud to take the next step in the evolutionary chain: The Vortice. The latest technology, combined with the great skill and craftsmanship of Sidi-based Italian factory technicians, brings together a mix of fresh solutions that meet the driver s desire for safety and comfort. Features
Perforated Lorica construction Teflon ventilated net insert Tecno calf tensioner for leg circumference adjustment Tecno Shin and Tensioner Fiberglass reinforced nylon ankle bandage Shock absorbing heel cup Shin plate rocker Fiberglass reinforced nylon toe slider with aluminum insert and air inlet Polyurethane / rubber composite Racing SRS sole
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Pointe coque Polycarbonate : Légère et supérieure s'adapter et confort en utilisant la technologie CAD de pointe. Coque aérodynamique avec port grand oeil pour une meilleure visibilité. pare-soleil intégré one-Touch : teinte fumée 3 étages réglable pare-soleil se déploie rapidement et facilement (Patent Pending). » Système de Ventilation avancé de Channeling ACS »: pleine avant/arrière d'air bouffées de chaleur et l'humidité et les sortir. Intérieur amovible, évacue l'humidité et sans odeur avec pointe tissu anti-bactérien. Dispositif de remplacement pour le bouclier RapidFire™ : Simple et sécurisé système à cliquet offre ultra rapide et sans outil de dépose et installation pour effi opération de caces. Dégagement rapide et réglable. Pinlock préparé bouclier et comprend. Insérer effet anti-buée Pinlock 100 % vision Max.
