Abrazadera de soldadura vertical Práctica popular Manija de liberación rápida Abrazadera de palanca vertical GH-101A

Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head.Size. 1/16 in.Length 4 in

The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ3 x 150mm.

The Metabo TKHS 315 M Site Saw is a precise, powerful table saw in professional configuration that quickly adapts to every application. It is fitted with a quiet induction motor that has a maintenance-free, robust design with a motor brake and overload protection. It also has restart protection that prevents unintentional start-up after power supply interruption, for compelte ease of mind. There is a sturdy parallel guide/ripping fence with quick fastening combined with a mitre fence that has a linear stop, so it can also be used a sliding table. The saw blade heigh is freely aadjustable and the saw blade inclination ca be adjusted from the front. It has a sturdy, powder-coated sheet steel design with a galvanised table-top and foldable table length extension. The frame and motor are supplied pre-mounted. Ideal for sawing squared timber, boards, panels and wood-like materials in the workshop and at construction sites. Supplied with: 1 x 300mm 24 Tooth Carbide Saw Blade, 1 x Mitre Fence, 1 x 600 x 800mm Table Extension, 1 x Chip & Dust Extraction Unit, 1 x Push Stick, 1 x Wheel & Handle Set and 1 x Parallel Guide/Rip Fence. Specification Input Power: 3,100 Watt.No Load Speed: 2,990/min.Table Size: 800 x 600mm.Blade Diameter: 315 x 30mm bore, 24 tooth TCT.Bevel Capacity: 0-45°.Cutting Height: 0-85mm.Cutting Width: Parallel Guide/Rip Fence: 340mm, Mitre Fence: 250mm.Dimensions: 1700 x 700 x 1000mm.Weight: 75kg.The Metabo TKHS 315 M Site Saw 110 Volt Version.

The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm

Stabila Spirit Level 2 Vial, is a smooth-ribbed box section spirit level, the ribbed profile provides extra strength preventing the profile from bending. This spirit level can be used to check the horizontally of overhead surfaces by turning it and its horizontal vial upside down. You can then measure precisely from underneath.1 vertical vial and 1 horizontal vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m. Stabila patent. Vials that are moulded in.Stabila 80AN Level 2 Vial.Length: 1000mm (40 in).

100 Series hasp and staple with concealed hinge pin and concealed screw heads, corrosion protected. Only the carded versions include fixings. 100/80 and 100/100 have hardened steel staples. Where to use it: Designed for doors closing flush, i.e. door leaf and door frame are level DG versions: with double joint designed for doors not closing flush, i.e. door leaf and door frame are not level, and corner solutions.Hasp length: 60mmHasp width: 20mmStaple bore dia: 7mm