Faithfull Straight Tinsnip 12in

The Dormer P805 Solid Carbide Rotary Bright Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball Nosed Cylinder has the following specification: Diameter: 6.3mm.Shank Diamter: 3mm.Working Length: 12.7mm.Overall Length: 45mm.

The Kew Nilfisk Alto Powerspeed Nozzle has a spinning pencil jet that increases both the speed of cleaning and the area that can be cleaned in one pass. It blasts dirt away and is ideal for cleaning heavily soiled areas. Can be used with Nilfisk C100, C105, C110, C120, E130 and E140 pressure washers.

The Milwaukee M18 BRAID-0 Right Angle Impact Driver has a compact design and measures 307mm in length and a 53mm head design, making it ideal for working within confined spaces. The full metal gearbox and gears provide superior durability and maximum torque in even the toughest applications. There is a multi-handle design with an extended paddle switch for multiple grip positions and maximum comfort. The 1/4in Hex chuck provides quick and easy one handed bit change and there are 2 speed settings, that allow for a wider range of applications. REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability. Individual battery cell monitoring optimises tool run time and ensures long term pack durability. There is also a on board fuel gauge and LED light. Bare Unit, No Charger or Battery Supplied. Specification No Load Speed: 0-1,500/0-2,250/min.Impact Rate: 0-2,400/0-3,400/bpm.Max Torque: 41/81Nm. Weight: 1.8kg.

20 unids / set Herramientas Profesionales para Automóviles Auto Vehículo Dash Trim Tool Car Audio Desmontaje Eliminar Instalar Conjunto de Palanca Reparación de Instrumentos Reparación Conjunto

Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 12mm leg length.Quantity: Narrow box of 650. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.

The Metabo TKHS 315 M Site Saw is a precise, powerful table saw in professional configuration that quickly adapts to every application. It is fitted with a quiet induction motor that has a maintenance-free, robust design with a motor brake and overload protection. It also has restart protection that prevents unintentional start-up after power supply interruption, for compelte ease of mind. There is a sturdy parallel guide/ripping fence with quick fastening combined with a mitre fence that has a linear stop, so it can also be used a sliding table. The saw blade heigh is freely aadjustable and the saw blade inclination ca be adjusted from the front. It has a sturdy, powder-coated sheet steel design with a galvanised table-top and foldable table length extension. The frame and motor are supplied pre-mounted. Ideal for sawing squared timber, boards, panels and wood-like materials in the workshop and at construction sites. Supplied with: 1 x 300mm 24 Tooth Carbide Saw Blade, 1 x Mitre Fence, 1 x 600 x 800mm Table Extension, 1 x Chip & Dust Extraction Unit, 1 x Push Stick, 1 x Wheel & Handle Set and 1 x Parallel Guide/Rip Fence. Specification Input Power: 3,100 Watt.No Load Speed: 2,990/min.Table Size: 800 x 600mm.Blade Diameter: 315 x 30mm bore, 24 tooth TCT.Bevel Capacity: 0-45°.Cutting Height: 0-85mm.Cutting Width: Parallel Guide/Rip Fence: 340mm, Mitre Fence: 250mm.Dimensions: 1700 x 700 x 1000mm.Weight: 75kg.The Metabo TKHS 315 M Site Saw 110 Volt Version.