Acerbis X-P Motocross Gloves, white-green, Size XL, white-green, Size XL

Feature:1.3200 PSI high pressure water gun body, brass fitting.2.Accessories of pressure washers, for cleaning the car, mechanical equipment, floors, walls, etc.Specification:NameSnow Foam Lance BottleMaterialReinforced nylon,Brass,PEHD(High Density Polyethylene)Capacity1L / 32ozSize300mm*85mm(Height * Diameter)Max. Pressure3200PSIMax.temperature60℃/140℉Nozzle MaterialBrassPackage Included:1 X NEW Snow Foam Lance Bottle1 X Adapter

Features
Regular/Straight cut in the Five-Pocket design ergonomically adjusted cut stylish comfortable fit through stretch content adjustable pockets in the knee lining prepared for protectors pockets for hip protector particularly abrasion and tear resistant thanks to DuPont™ Kevlar® fiber

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

500 D Polyester Gewebe herausnehmbare Reissa®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv herausnehmbares Thermofutter YF-Protektoren zertifiziert nach EN 1621-1 an den Schultern und Ellbogen herausnehmbarer Schuam im Rücken SAS-TEC® SCL-19 Rückenprotektor zertifiziert nach EN 1621-2 nachrüstbar reflektierendes 3M Scotchlite ™-Material AirVent-Belüftungsreißverschlüsse 3 Außentaschen 2 wasserdichte Innentasche Verbindungsreißverschluss Sicherheitsnähte

nullSpecification:LED power: 45W/90W/180W/270WVoltage: 12-24VSize:4/7/13/20InchBeam type: flood+spot combo beam.LED color temperature: 6000KWorking life: 50000 hoursWorking temperature: -40-60degreeWaterproof rate: IP67Material: 6063 Diecast aluminum profile, stainless steel bracket, PC LensApplications:-Indoor and Outdoor uses-Back up light-Off Road Lighting-Truck, Trailer Interior and Exterior Lighting-Construction Lighting-Garden, Backyard Lighting-Boat Lighting-ATV, vessels, bus, off-road vehicles, trucks, fire engines, forlifts, mining, trains, tanks, etc.Package Include:1X LED Work Light Bar

Specification:Product name: Turn Signal Indicator AdapterMaterial: PlasticColor: BlackDimension: 52.5x35mmSuitable for the installation of all kinds of converted steering lights, Indicator Light AdaptersFitment:For KAWASAKI Z250 Z300 Z650 Z750 Z800 Z900 Z1000 Z1000SX Z750S Z250SLFor KAWASAKI NINJA1000 NINJA650 NINJA650R NINJA250R NINJA300RFor KAWASAKI KLE Versys 1000 KLE Versys 650 VERSYS-X 300For KAWASAKI ER6N ER6F ZRX1200 KLE 500 KLR 650For KAWASAKI ZX6R ZX10R 2008-2017The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!Note:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:4 X Turn Signal Indicator Adapter