6 Speed Gear Shift Knob Stick For Ford Fiesta Fusion Transit Connect 2002 On

Description:1. Unique design, fashionable, lightweight and durable.2. Perfect fitment, direct bolt-on designed for easy installation.3. Grills are made of high-quality ABS for better durable and strength.4. Protect your car radiator, inter-cooler and other vital engine components from outside force.Feature:Model Number: 926586Product Name: Front Grille(RightLeft)Condition: NewColor: Gloss BlackMaterial: ABS PlasticDimension: 35x21.5x4.5cmPackage Size: 47x37x8.5cmQuantity: 1 Pair (leftright)Part Number(Left): 51137124815/51137113733Part Number(Right): 51137124816/51137113734Fitment:Fit For BMW X5 E53 2004-2006Package Included:2 X Front Grille

Feature:1.No modification required, directly upgrade your original knob.2.Come with 3 hoses (8mm,10mm,12mm).3.Distinctive metal and high quality heavy material.4.Has adapters for different gear sticks diameters ranging from 8mm up to 12mm.5.These sleeves are tightly fitted in place with hidden grub screws.Specification:Product NameShift KnobColorBlue/Red/SliverMaterialAlluminum AlloyPU LeatherGear Knob TypeStandardPlacement on VehicleFrontShift Knob Dimension70mmx15mm/2.76x5.9 inches(L*D)Connector Inner Diameter8mm, 10mm, 12mmInstall:1. Remove the original car gear shift knob.2. Take Plastic adapters suitable size For shift knob.3. Put The gear head into the shift knob.4. The gear head directly set into the shift knob rod.Package Included:1 X Shift Knob1 X Wrench3 X Install Adapters1 Set X Screws

Features
S.E.P. supports ideal moisture transfer quick re-drying time odourless supports the natural position of the body 1st layer of modern sportswear

Die Raptor ist der neue High-Level Jet seine hat eine Elevate-Qualität der Konstruktion und es ist mit exklusiven elegant sportliche Grafik realisiert. Es ist ein echter Jet-Helm von zusammengesetzten Fasern hergestellt, garantiert höchste Sicherheit und Leichtigkeit. Der Helm zeichnet sich durch eine wesentliche und minimalistischen Stil. Fiberglas und Carbon-composite Monocoque voll Jet-Schale in zwei Größen Dunkle Sonnenblende Abnehmbar und waschbar innere Polsterung mit hoher Absorption Stoff Schwitzen und mesh-Stoff net mit Silberionen-Behandlung für eine effektive Bakterien-statische Aktion. Kinnriemen mit mikrometrische SchnalleGRÖßEN XXS 54cm - XS 55cm - S 56 - M 57cm - kleine Muschel ML 58-59cm - 60cm L - XL 61cm - große Schale

Premier is one of the most historic and oldest brands in the motorcycle helmet world. In 2014, Premier s program is extended with a retro full face helmet, which is not only improved in fitment but also graphically and all other components. The Trophy line is based on the shape of the helmets from the 70s, but equipped with the latest safety standards. Features
The outer shell is formed using fiber DCA: a carbon fiber and aramid fiber blend and reinforced with Dyneema by epoxy resin The inner shell has been formed by a variety of EPS that is best able to absorb the energy, caused by a fall The interior is perfectly matched to the harmonious retorstyle and is made of anti-allergic material and synthetic leather, like the cheek pads The Trophy helmet is equipped with a double D-ring closure Like all Premier Helmets is the Trophy also tested according to current European legislation ECE 22-05 Weight: 1200 + - 50 gr

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.