Free
Support
Spout Height:10.6; Type:Bar / Prep; Style:Contemporary; Finish:Brushed Gold,Painted Finishes,Chrome,Nickel Brushed; Faucet Type:Kitchen faucet; Installation Type:Wall Mounted; Cold and Hot Switch:No; Valve Type:Ceramic Valve; Overall Height:19; Spout Length:12.3; Faucet Body Material:Brass; Faucet Spout Material:Brass; Bodysprays Included:No; Handle Material:Zinc Alloy; Batteries Included:No; Drain Included:No; Water Pressure:8; Installation Holes and Handles:Single Handle One Hole; Features:Rotatable; Shipping Weight:0.47; Net Weight:0.35; Listing Date:07/20/2021
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
Metric combination spanners offset at 15° - DIN 3113A. Manufactured from chrome vanadium steel with a satin finish.Size 50mm.Length 540mm
The Zarges fibreglass compact platform steps with glass reinforced polyester stiles, offering effective insulation and eliminated spark risk. Ideal for use on electrical installation, as well as other special applications. With 80mm deep aluminium alloy treads for comfortable work, and non-slip serrated surface. Includes safety platform (250mm x 250mm). Only 8.8cm wide when folded. Ideal for limited storage applications. All sizes conform to EN 131 standards, and have a 150 Kilo rating.Number of treads: 3. Platform height: 0.68m. Closed length: 1.39m. Weight: 5.9kg. Stile depth steps / back stay: 50 / 50mm. Overall base width: 0.50m. Base spread: 0.71m. Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.
The ABUS E60 Euro profile half cylinders are suitable for switch gear & garage doors They have precision, mushroom pin and paracentric keyway which offer comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. For emergency and convenience feature the outside key can operate the lock with internal key in place. How to measure a Euro Profile Cylinder: Distance from one end of cylinder to centre of cam
IRWIN Vise-Grip powerful locking action with jaws long enough to reach into tight spots with small enough tips to grip tiny objects. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Incorporates a wire cutter.Visegrip Irwin 9LNC Long Nose Locking Pliers Length: 225mm (9in).Capacity: 73mm (3in).