Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.
Hauteur de bec:#(115mm(4.53)); Largeur du bec:#(65mm(2.56)); Style:contemporain; Finition:Ti-PVD; Type d'installation:Diffusion large; Nombre de poignées:1 poignée; Débit:#(N/A); Interrupteur Froid et Chaud:Oui; Type de vanne:Soupape céramique; Hauteur totale:#(180mm(7.08)); Longueur du jet:#(130mm(5.12)); Robinet centre (pouces):0-1; Matériaux de corps:Laiton; Acier inoxydable:Laiton; Valve incluse:Oui; Matériel de Poignées:Laiton; Evacuation incluse:Non; Trous d'installation et Poignées:Mitigeur un trou,1 trou; Caractéristiques:Jet pluie; Poids à l'expédition:1.320; Poids Net:1.16; date d'inscription:03/27/2015; Catégories de base:Accessoires,Plomberie,Appareils de plomberie,Robinet de lavabo
The Union 366 Ambassador aluminium door furniture is suitable for use with majority of mortice locks. They are sprung and have bolt through and wood screw fixings. Made from aluminium with black plastic moulded end caps. Short Plate Size: 96mm x 38mm.Standard Plate Size: 152mm x 38mm.Bathroom Privacy SetStandard plateVisi
This Henry Squire LB2CS Shielded Bracket features a shackle protector which provides closed shackle protection for an open shackle padlock. Has a 6mm thick, hardened steel construction. CRIMESTOPPERS supported. Right handed.
Que contient la boîte:Rideau de douche et crochet de rideau de douche; Thème:Thème classique,Paysage; Type:Rideaux de douche et anneaux; Application:Salle de Bain; Style:Moderne; Matériau:Polyester; Caractéristiques:Imperméable; Dimensions du produit:150180 180180 180200; Poids à l'expédition:0.395; Poids Net:0.32; date d'inscription:05/17/2021; Mode de production:Auto-produit; Produits spéciaux sélectionnés:COD
