TACX Jockey Wheels Stainless Steel Bearings, Fits 7-8spd Shimano & 8-9-10spd Campag,

Durable fabric paired with functional features - this makes up the SCOTT Factory Team Support shorts. The various pockets provide a lot of stowage for your tools to ensure you will always have the most important things with you. Fit
Regular
Features
Abrasion resistant fabric 2 zipper pockets at side 2 back pockets with flap 2 hand pockets in front + 1 money pocket belt loops Contrast details

Durable 600D Dobby polyester main body fabric 360 Chassis with Internal gaiter at boot YKK Zippers throughout Zippered pockets and vents Waist adjustment 3M DWR water repellent coating

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Torwarthandschuhe mit gezieltem Halt speziell für Spiele. Der Kasten gehört Dir. Bei den adidas Predator Ultimate für den Spieltag ist die Handfläche zum Schutz vor harten Schüssen 3,5 mm dick gepolstert und sorgt mit griffigem Latex für optimalen Grip bei allen Bedingungen. Herausnehmbare Elemente an den Handgelenken und Fingern sorgen für zusätzlichen Schutz und Stabilität beim Abwehren von Bällen. Leichtes, stretchiges Material am Handrücken machen sie besonders bequem, während Silikonelemente besseres Fausten ermöglichen. Dank der längeren Handgelenksbandage lassen sie sich zudem einfach an- und ausziehen. Außerdem garantiert der Schnitt der Finger eine bequeme Passform. Wird in praktischer Aufbewahrungs-Kartonage mit Schubladen-Systemverschluss geliefert! Aus dem 302 REDIRECT PACK!Eigenschaften: Material: 100% Sonstige FasernVerschluss: Klettband Länge von Mittelfingerspitze bis Saumkante: 31 cm bei Größe 8,5Pflegehinweise: Nur Handwäsche Hauptteil und Handrücken: Polyester; Handfläche: LatexBeschichtung: Latex Materialart: Latex Material Futter: Textil URG 2.0 Latex-Handfläche für optimalen Grip und PolsterungEvo Zone Tech Handflächen-Design: Spezielle Zonen auf dem Handschuh für eine bessere Kontrolle Silikonelemente für kraftvolles, kontrolliertes Fausten des BallsHerausnehmbare Fingersave Elemente: Bietet exzellente Unterstützung beim Fangen, Halten und Werfen des Balles. Die Fingersave® Elemente stabilisieren und schützen die Finger vor dem Umknicken nach hinten beim Abwehren von Schüssen Durch einen verdeckten Reißverschluss am Handgelenk lassen sich die Elemente einzeln herausnehmenHerausnehmbare, stabilisierende Wrist Control Elemente für zusätzlichen Halt und Schutz am Handgelenk: Das neue doppelte Klettband sorgt für beste Stabilität und individuelle Anpassung. Das stabile Element lässt sich über einen Klettverschluss innen am Handgelenkbereich herausnehmenCONTACT MAXIMIZER: Spezieller Schnitt für eine maximale Kontaktfläche während allen GriffbewegungenPositivschnitt für eine gute und angenehme PassformNahtlose, eng anliegende Bandage am Handgelenk für eine optimale Passform Verschlussriemen aus Stretch für individuelle Passform und sicheren SitzClose-Fitting Bandage: Durch eine revolutionäre Technologie bietet der Handschuh eine ideale Passform für jedes Handgelenk Das neue doppelte Klettband sorgt für beste Stabilität und individuelle Anpassung

John Doe Original Jeans with their perfectly tailored straight fit are the absolute classic in the John Doe clothing line. With a lining made from the worldwide innovation XTM-Fiber® (fiber technology made from DuPont™ Kevlar® / Coolmax® and Lycra®), they achieve the perfect balance between protection and ideal wearer comfort. Thin, extremely flexible, water-repellent, yet provide the wearer with optimal protection in the event of extreme conditions and crashes on every ride, whether in the city or on long trips. Built-in armor pockets at the knee (adjustable) and hip allow the wearer to add armor for additional protection. Worldwide innovation in motorcycle clothing - XTM-Fiber: Features
XTM protective fiber Water-repellent 10.5 oz. denim Adjustable armor pockets built into the knee Armor pockets built in at the hip Straight fit YKK zipper Approved by TÜV Rheinland Armor not included, sold separately
XTM protective fiber
Crash side 100% DuPont™ Kevlar® aramid fiber Skin side 100% Coolmax®
XTM-Fiber® XTM-Fiber® provides the perfect balance of extreme protection and highest wearing comfort. The outer layer, made of DuPont Kevlar® aramid fibres, offers the highest protection in the case of a fall. The inner Coolmax® fibre blends regulate the skin temperature and fit perfectly to the wearer. Breathable A layer of Coolmax® on the inside of the XTM-Fiber™ facilitates the outward transport of moisture and helps you not to break a sweat, even on long tours. Perfect fit thanks to stretch Full protection with maximum comfort: both the XTM-Fiber® and the jeans themselves fit perfectly to the wearer through the woven Lycra®. Dirt and water-repellent So that a light rain shower and a bit of dirt don’t immediately spoil the whole tour, our jeans are coated with a dirt and water-repellent.

ADT-Advance Thermoplastic ADT-Advance Thermoplastic cover made of an injection moulded, thermoplastic resin mix with high impact resistance. Shell 2 size cover to ensure the helmet gives a perfect fit. Visor
Interior scratch-resistant polycarbonate treated visor with UV389 ray filters Max Vision Pinlock Easy to use interior sun visor Visor geometries are carefully studied and designed through advanced optical software. The visor has a variable thickness in order to obtain the optical class 1, the best performance achievable for a lens Visor is treated with the most performing anti-fog processes to guarantee the best performance even in the most critical conditions Visor is treated with the most performing anti-scratch processes which effectively protect the surface The helmet has fastening and rotation system that allows to remove the visor without using tools This helmet comes standard with a clear visor.
Aerodynamic The shell shapes and related aerodynamic spoilers are optimized due to intensive sessions in the wind tunnel. Aerodynamic performances allow the best comfort at all speed. removable and washable The interiors and interior comfort pads are removable, washable and replaceable, with different thicknesses to ensure the full customisation of the helmet. Retention system The retention system has a micrometric buckle made of metal and acetal resin.