Juego de extractor de tubo manual de herramienta de abocinado universal de 5-19 mm para herramientas de refrigeración de cono excéntrico de ángulo de cobre y latón de 3/16 a 3/4 pulgadas

These Forgefix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 5/8 x 4 Box 200

The D21580K is equipped with a 1705 watt motor that produces a maximum drilling capacity of 152mm. This powerful drill makes drilling jobs quick and easy. The power tool has large and comfortable side handle for enhanced user comfort and a large rear handle enabling the user to work with while wearing gloves. The DeWalt Diamond drill has a mechanical clutch for added user protection and a lock on button for continuous operation whilst drilling with a stand.This diamond drill is prefect for electrical, plumbing or HVAC applications.

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

The Henry Squire HLS50S High Security Lockset with an integral lock and pivoting hasp providing formidable resistance against attack and corrosion. It provides an integrated solution for securing vans, gates, doors, garages and other high risk areas. The lock body is made from solid hardened steel and the hasp is made of a special cast material. Hardened boron alloy steel shackle - fully protected. 6-pin tumbler mechanism giving over 250,000 key differs. Rekeyable. CEN Graded. Available keyed alike and master keyed. Available keyed alike and master keyed. CRIMESTOPPERS supported. Lock Body: 50.0mm.Lock Body Thickness: 26.0mm.Shackle Diameter: 10.0mm. Hasp Length: 150mm.Hasp Width: 68mm.Hasp Thickness: 16.0mm.

A slimline design and soft-grip surfaces make for a comfortable, in hand fit. It also has an automatic spindle lock, which makes it easy to change tools, a 10mm quick-change drill chuck and an LED light to illuminate the work area.

The Carver Medium-Duty Rack Clamps have a variety of uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T290-450 Medium-Duty Rack Clamp has the following specification: Capacity: 450mm (18in).Reach: 90mm (3.1/2in). Overall Length: 655mm (25.3/4in).Clamping Force: 1,800N.Weight: 7.0kg.