A modern tubular alloy pull handle for bolt through fitting to doors which don't require a mortice latch.Supplied with screws and fitting instructions.Fitting Instructions:1: Mark a vertical line on door face approx 75mm from door face on the side of door to which the handle will be installed.2. Measure 2 points on this line for fixing holes dependant on handle size (either 225mm or 300mm apart).3. Use a 8mm drillbit to drill the two fixing holes from the handle side of the door ensuring they are square to the door surface.4. insert the two supplied bolts into the drilled holes from the opposite side and fasten into the handle profile.Length: 300mm.
The Union 3K74 series British standard 5 Lever Mortice rollerbolt sashlocks are suitable for use on timber doors hinged on the left or right and are also suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side with the latch bolt being withdrawn by a lever handle from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 14mm bolt throw. They are also pierced to accept bolt through furniture. The 3K74E series locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 25 Year guarantee. Deadbolt: Brass, with hardened steel rollersLatch Bolt: Roller bolt (non handed)Follower: Sintered Iron, 8mm squareKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722 (standard)Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit B-3K74R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors.Visi packed.Finish: Polished Brass FinishForend: BrassBox Strike Assembly: Painted to match forendCase Finish: Silver powder coatCase Size: 80mm x 108mm (3in)BackSet: 53mm This is the measurement from the edge of the door to the centre of the keyhole.Centres: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA4252 safety sign has the following specifications:Size: 400 x 600mmMessage: 'Site Office'.
