Monolithic Single Front Row Car Seat Cushion Cover Pad Breathable Comfort Common

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Cheek pads for the following helmet: X-802


cheek pads

helmet Size cushion thickness

XS 35mm

S 30mm

M 35mm

L 30mm

XL 25mm

XXL 20mm

Elegant Metal Decoration Boots

Description:1.Breathable fabric ensures good air circulation2.Double stitched,UV-treated,fade proof,washable3.Water-repellent4.Keep your motorcycle off rain/snow,dirt,dust,sun UV rays,bird mess5.Elastic hem and side squeeze buckle underneath for a secure and snug fit6.Easy to carry, fits most motorcycles saddle bag after folded7.With a free storage bagSpecification:Color: BlackRed, BlackSilver, BlackOrange, BlackBlue, Silver,BlackMaterial: 190T polyesterUV:50+Size: L*W*H(cm)M:200*90*100cmL:220*95*110cmXL:230*95*125cmXXL:245*105*125cm3XL:265*105*125cm4XL:295*110*140cmPackage Included:1 X Storage Bag1 X Motorcycle Cover

Specification:Type1:4PCS (front row) kitType2:9PCS (front and rear row) kitProduct Name: General Motors CushionColor: as shown (9 colors)Material: durable polyester fabricMaterial: polyester fiberScope of application: Suitable for most car seats on the market, generally four seasons, to make your car look new.Function: high-quality seat cover fabric is breathable, comfortable to touch, anti-dirty, wear-resistant, easy to clean, does not fall off, summer is not too hot, winter is not too cold, it is a high-grade seat cover for the four seasons.Feature:- Breathable with high-quality seat cover fabric, comfortable, wear-resistant, easy to clean, not falling off- Featured innovative fabrics and designs- Update the appearance of old or dirty seats- Prevent splitting, stains, fading, dirt and pet hair- Easy to install, suitable for most seatsPackage Included:The 4PCS (front row) kit includes:2 * Headgear size: 29X25CM2 * Front seat size: 116x53CMAccessories: contains a pack of hooksThe 9PCS (front and rear row) kit includes:5 * Headgear size: 29X25cm2 * Front seat size: 116x55cm1 * Rear seat size: 130x53cm1* backrest size: 130*73cmAccessories: contains a pack of hooks

The latest innovative GAERNE GX1 ENTRY-LEVEL boots for motocross and offroad combines technology with style and offers maximum safety with optimal comfort. The GAERNE GX1 boot is made with special high-quality materials. The new DUAL-TECH ANKLE SYSTEM is unique in this price range and has been completely integrated into the design. This technology provides stability and flexibility and thus prevents over-extension of the foot during back and forth movement as well as twisting. Taking advantage of the technology developed for the high-end SG12, SG10 and Fastback boots, the GX1 combines strong protection features with high levels of comfort. The concept with the 4 interchangeable aluminum buckles provide for a simple, fast and accurate closure. By adjusting the upper two buckles, the calf width can be regulated, thus also space for a knee orthosis. At the presentation to the trade press, this boot was priced VERY GOOD. Features
High-quality, durable cowhide with plastic protectors DUAL-TECH ANKLE SYSTEM for more safety and flexibility Adjustable calf width by displacing the top two buckles Shin and knuckle protection highly comfortable fit Shaft height about 36 cm Microfiber lining with ergonomically shaped inner padding 4 wide aluminum buckles, adjustable and easily replaceable Suede grip guard and heat protection Switch reinforcement made of sturdy plastic anatomically shaped, replaceable footbed The replaceable sole has a steel core and is oil and gasoline resistant the toe is protected by a steel toe with grippy and stable double-stitched GAERNE MX-OFFROAD-GOODYEAR sole