Few things are more dispiriting than turning the ignition key and hearing nothing. Just when you need your car to start, it plays dead. Worse still, it's probably your fault. Look at the lights switch - did you leave them on? Modern car batteries are very reliable, but leaving the lights on for a few hours will soon discharge them. Even a boot light or an interior light left on overnight can flatten a battery. And a car left standing for a month or so may discharge its battery just from the current drawn by the alarm.To start a car with a flat battery you need the S Style SSJL200, a set of good quality heavy-duty cables with beefy clamps at each end, and a friend is also a good help! Your friend must have a car with a battery in good condition, this will aid in the success on starting your flat battery. Simply position another car near yours so that the batteries are close, but do not let the vehicles touch. Connect one end of the SSJL200 red jump lead to the positive (+) terminal of the boosting battery (Do not let the other end of the red lead touch any vehicle metal components) and connect the other end of the red lead to the positive (+) terminal of the flat battery. Then connect one end of the SSJL200 black jump lead to the negative (-) terminal of the boosting battery and connect the other end of the black lead to a bolt or metal bracket, well away from the battery, on the engine block of the vehicle to be started is a good source. Ensure that the S Style SSJL200 jump leads cannot come into contact with any moving parts of either engine. Start the engine of the boosting vehicle and run it at a fast idle speed for a few minuets. Now turn the ignition to start the engine of your vehicle, the S Style SSJL200 will pull power from the boosting battery to help your battery back to life. Check that your vehicle is running properly then carefully disconnect the SSJL200 and your on your way. 200 Amp.2.5m length.Jump lead with 10mm insulation.Supplied in poly bag with euro slot.
This Scan Mandatory Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Eye protection must be worn'.
The Pro Metal Quick Connect hose connectors from Hozelock have zinc die-cast sleeve, ensuring that they are strong, durable and scratch resistant. The large bump ring protects greenhouses and cars from damage. The Aqua Stop connector incorporates an internal valve that stops the water flow when an accessory (e.g a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden because it stops the water flow so less water is wasted. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system and the sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected by barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious, flexible hose-tail on the nut.This hose connector is best used at the gun end of a hosepipe. Suitable for use with all 12.5mm (1/2 inch) and 15mm (5/8 inch) hose.
Catégorie:Toile roulée; Techniques:Fait à la main; Taille Suggestion:Grand; Thème:A fleurs / Botanique,Abstrait; Quantité:Un Panneau; Forme:Format Horizontal; Style:Moderne,contemporain; Matériau:Toile; Chambres adaptées:Salle à manger,Chambre à coucher,Salle de séjour,Bureau de maison,Entrée Portique,Salle de Bain,Cuisine,chambre d'enfants; Poids à l'expédition:0.35; date d'inscription:12/18/2020; Taille:4080
