Fellowes 8026501 PlushTouch Lumbar Support

Shreds credit cards/paper clips/staples/access entry cards/ I.D's & CD roms, manual on/off/reverse, LED for standby/paper jam & motor overheat, dustproof enclosed bin with porthole, separate security slot for CD roms, moveable on four castorsConforms to DIN level P-3* Using 70gsm weight paperUp to 12 sheet capacity *, 3.8 x 48 cross cut size, 119 (A4 sheets/min) speed, 31 litre bin, 230mm entry width, on/off control via light barrier

VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: White.Size: 1m x 20mm.

Polycell Multi Purpose Polyfilla mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler, which is suitable for a variety of jobs, even large areas. Very easy to use. Tools required: filling knife, mixing bowl and sand paper. Drying time: 1-2 hours. Suitable for indoor use only.Size: 1.8kg.

Black on white 12mm gloss tape to fit PT-8E/500/2000/3000/5000

These labels are printed using a laser printer through the XTL 500 softwareWhite print area with clear overlam 54mm x 23mm Laminated Wire/Cable Wrap Sheet Labels, printed through a laser printer using XTL 500 software

New exclusive formula: High performance: repositionable for up to 15 seconds.Solvent free and low odour.Non-drip gel formula.Ultra strong bond. Can be used on metal, most plastics**, wood, paper, cardboard, rubber, leather fabric, ceramics and porcelain. Limitations of use:**Except polyethylene and polypropylene - for these plastics use Loctite All Plastics. Not suitable for repairing items that contain hot liquids (e.g. cups mugs etc.) or items that will be continuously wet in service. For interior use only. Leather may become hardened or discoloured. Not suitable for very soft leather. WARNING: READ INSTRUCTIONS CAREFULLY. HOLD AWAY FROM THE BODY DURING USE. USE IN A WELL VENTILATED AREA. PROTECT CLOTHING AND SURROUNDING AREA. SQUEEZE TUBE GENTLY. Ensure surfaces to be bonded are clean, dry and close fitting.Lightly dampen porous surfaces. Screw nozzle onto tube to pierce. Unscrew cap. Apply a tiny amount of Loctite Super Glue to one surface only. Put surfaces together, reposition if necessary and hold for at least 30 seconds. Allow at least one hour before use, and check well bonded. After use: Before replacing cap, lightly sap the base of the tube on a flat surface to empty the nozzle. Wipe nozzle with a tissue dipped in Loctite Glue Remover or nail varnish remover. Replace cap and store upright in a cool dry place.