LiitoKala Lii-100 is designed for portable, flexible and multi types of batteries. It can detect the battery type and charge the battery automatically under your selected charging current. Built-in LED indicators to display the charging status and 5V/1000mAh USB output function. Flexible size: One-slot charging and management system, Micro USB DC 5V input port, portable to carry around 500mAh, 1000mAh charging current for selection CC / CV charge mode applies to the battery to maintain a constant current flow and protect battery and users¡¯ safetyLED indicators display the charging status 25pct - 50pct - 75pct - 100pct When you charge LiFePO4 or 3.85V battery, must fix the charging mode: Identifies 1.2V Ni-MH / 3.7V Li-ion battery automatically and select manually for 3.85V battery Li-ion and LiFePO4 battery Protections: over-charge, over-discharge, reverse polarity, short circuit protections Refresh function for 0V battery Identify dead or bad batteries Typ: AC Ladeger?t Brand Model LiitoKala Lii-100 Input voltage 5V/1A Output voltage 4.2V ¡À1% / 5V Output current 500mA/1000mA Recharging current 0.5A/1A Compatible Batteries Li-ion/IMR: 26650,22650,26500,18650,18490,18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440. Size 113 x 38 x 32mm
Produkt-Eigenschaften: Das Crown 3 Spulensystem wurde f¨¹r die perfekte Balance von Dampf und Aromenproduktion optimiert. Die Annahme eine Parallelspulenstruktur zusammen mit einem geeigneten Stecker-pull-Mechanismus f¨¹r einen schnellen und einfachen Austausch-Prozess. Das 0,5-Ohm-Crown 3 SUS316 Parallelspulen kennzeichnet eine Wattbereich von 70-80 Watt Produktspezifikationen: Marke: Uwell Spule SUS316 0,5 Ohm (70-80W) Zum Uwell Crown 3 Gr??e 8 x 12mm Nettogewicht 10g Packungsinhalt: 4 x Uwell Crown 3 SUS316 0,5 Ohm Coils
The Cultura by Vzone is compatible with 20700/18650 battery and features long standby time. It utilizes the most advanced chip set HW Board 1.0 with a range 7 to 100W, multiple output modes. The ergonomic and compact design integrates fine finishing bracket in 2 tone colors for better grip and the buttons on the side. It features the In-Mould Labeling (IML) case for colorful, greater wear resistance, graphic quality and fine texture. Aluminum alloy construction Houses 1 x 18650/20700 (sold separately) Temp Range at 200?-600? / 100?-315? 510 threading connection Micro-USB port Wattage Range 7-100W Max Output Voltage 8.5V Max Output Current 32A Taste Mode Norm/Soft/Hard/User Memeory Mode M1/M2/M3 Resistance Range 0.1-3.0Ohm KA Mode, 0.05-1.0Ohm for Ti/Ni200/SS316 Mod Resistance 0.1-3ohm Output Mode KA/TC-SS316/TC-Ni200/TC-Ti/TCR Mod Size 89 x 38 x 30mm
CoilART Mage Mech V2.0 Mod comes with brass construction and painted with the electroplating frosted black. It features self-adjusting battery contact and supports the dual battery in series stackable. It is compatible with 18650, 20700 and 21700 battery. With Hybrid 510 connection, most of atomizers could contact the battery directly for better power transfer and a harder, faster hit. The Mage Mech V2.0 Mod also features internal insulation protection to ensure the safety. 25mm of the top 26mm of the tube 91mm overall height Brass construction Electroplating frosted black Internal insulation protection Hybrid 510 connection Silver and golden fire pin Dual battery in series stackable Features self-adjusting battery contact Powered by 2 x 18650/20700/21700 (Sold Separately) Brand: CoilArt Model MAGE MECH V2.0 Version Stacked Edition Size 91 x 26mm
