Hammerite 'Direct To Rust' Metal Paint - Smooth Yellow 2.5L

The Record Power BDS150 belt and disc sander is a very useful addition to most workshops. By changing belt or disc grits and pressure, the machine is equally at home with rapid material removal or fine finishing and moulding shapes. It is a compact belt and disc sander, equipped with an induction motor for quiet dependable performance and a cast iron base to keep the unit stable during use. It combines the two most popular types of fixed sander for all types of job applications. A tilting table is fitted to this machine, which provides for better bevels and mitres, along with an adjustable belt sander for horizontal or vertical use. Specification Input Power: 1/3 hp.Disc Speed: 2,850/min.Disc Size: 152mm (6in).Belt Size: 101mm (4in).Table Size: 225 x 158mm.Size (H x W x D): 245 x 440 x 360mm.Weight: 19kg.

This R.S.T Sybren Plastic Rule fold to a more convenient, smaller size, for easier storage. It has both metric and imperial markings. Length Unfolded : 1000mm (39 inch).

Stahlwille Series 13 Combination Spanners. Metric sizes, with 15° offset ring end. They are drop forged from high-grade chrome alloy steel and chrome plated. Manufactured to DIN 3113 form A/ISO 7738 form A. The spanners are optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gently quenched in oil. They are extremely strong yet lightweight due to Stahlwilles's 'double-T profile'. Stahlwille's unique plating method prevents the problem of chrome flaking. The ring end of the spanners are equipped with an Anti-Slip Drive profile. This permits high transmission of forces to the flats of the nuts and bolts without damaging them.MADE IN GERMANY.Stahlwille Combination Spanner. Size: 8mm.Length: 115mm.

Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120519 Bi-Hexagon, 12-point socket has the following specifications:Size: 19mm. Length: 38mm.

Stahlwille Screwdriver sockets for inside TORX® screws. 1/4in square drive. Made from chrome alloy steel and chrome plated. Overall length: 28mm. MADE IN GERMANY.Stahlwille Torx Bit Socket 1/4in Drive. Size: T30.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S