helit Klein-Karteikasten A7 quer, rot, unbestückt aus Polystyrol, für ca. 300 Karten (H6214725)

Features: It is a perfect travel companion for carrying all your washing necessities. Enough space and multiple mesh pockets to keep all your personal belongings in one bag. Made of water-resistant daron fabric with thick inner padding, protect your belongs from shocking. Water-resistant fabric, strong hanging hook and zipper ensure a long life time. 2 sides zippered compartment for extra storage make it easy to put and find your frequently-used items. Large compartment with 2 zippers keeps all stuff organized, fast spotting and grabbing of items with no effort. Convenient to carry and hang, you can keep it on towel racks, shower rods or door knobs.

Bondloc B2001 is a hand kneadable, speciality epoxy putty that mixes in 1 minute for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification Typical properties: 7 days cured at 24°CColour: Black, changes to grey after mixing.Viscosity: putty/hand kneadable.Pot life @24°C: 20 mins.Comprehensive strength: 83 N/mm2.Adhesive tensile shear: 5 N/mm2.Cured hardness shore: D 75.Dielectric strength: volts/mil 300.Solids: 100%.Temperature resistance: Wet: 49°C, Dry: 121°C. Size: 50g.

This Faithfull Low tack masking tape provides a useful alternative to the standard equivalent and is ideal for applying on delicate surfaces or if leaving in place for more than 24 hours.The FAITAPELTM25 Low Tack Masking Tape has the following specifications: Width: 25mm. Length: 50 metres.

The Everbuild range of fire sealants are five hour rated, one part, emulsion acrylic based, intumescent acoustic sealants that gives a firm yet flexible seal to joints in a variety of fire rated structures. Tested following the principles of BS 476 part 20 (1987) as detailed in Warrington fire research report No. 144508/B (Feb 2005). The product, in suitably designed joints, will resist the passage of fire for up to 5-hours. The selected fillers used in this formulation also make it suitable for use as an acoustic sealant. When exposed to heat, it swells greater than 3 x its original size, so creating a char that will resist the passage of fire for up to 5 hours and no priming is required for most construction substrates. The Everbuild fire sealants are for use in joints up to 50mm wide and give excellent acoustic properties for sound deadening and the sealant is easy to apply and tool off for the perfect finish. Fast cure - tack free in 15-minutes, can be overpaintable and is Availiable in White or Brown.Areas for use; Sealing joints, voids and irregular holes in fire walls, partitions and other structures; also for maintaining the integrity of pipes and cables that penetrate them.For internal perimeter pointing of fire rated door and window frames. Colour: White.

Extrabreit zum Unterteilen von Schriftgut in Prospekthüllen. Taben werden nicht verdeckt. Einsteckschilder können mit der DURAPRINT® Beschriftungssoftware professionell beschriftet werden. Höhe x Breite mm: 297 x 230/245 Teilung: 20 Lochung mm: 80x80x80 Einsteckschilder: blanko, blanko mit Farbstreifen, 0-20, A-Z Hauptmerkmale Gewicht u. Abmessungen Höhe 297 mm Breite 230/245 mm

New exclusive formula: High performance: repositionable for up to 15 seconds.Solvent free and low odour.Non-drip gel formula.Ultra strong bond. Can be used on metal, most plastics**, wood, paper, cardboard, rubber, leather fabric, ceramics and porcelain. Limitations of use:**Except polyethylene and polypropylene - for these plastics use Loctite All Plastics. Not suitable for repairing items that contain hot liquids (e.g. cups mugs etc.) or items that will be continuously wet in service. For interior use only. Leather may become hardened or discoloured. Not suitable for very soft leather. WARNING: READ INSTRUCTIONS CAREFULLY. HOLD AWAY FROM THE BODY DURING USE. USE IN A WELL VENTILATED AREA. PROTECT CLOTHING AND SURROUNDING AREA. SQUEEZE TUBE GENTLY. Ensure surfaces to be bonded are clean, dry and close fitting.Lightly dampen porous surfaces. Screw nozzle onto tube to pierce. Unscrew cap. Apply a tiny amount of Loctite Super Glue to one surface only. Put surfaces together, reposition if necessary and hold for at least 30 seconds. Allow at least one hour before use, and check well bonded. After use: Before replacing cap, lightly sap the base of the tube on a flat surface to empty the nozzle. Wipe nozzle with a tissue dipped in Loctite Glue Remover or nail varnish remover. Replace cap and store upright in a cool dry place.