Plastikote Aerosol Fast Dry Enamel Night Blue 100 ml 103S

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)

This BlueSpot 46 piece socket set contains a variety of useful sockets which are supplied in a blow mould case for handy storage. The set includes the following: 13 x 1/4in drive sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm21 x 1/4in drive bit sockets:3 x Flared: 4mm, 5.5mm, 7mm.3 x Phillips: PH1, PH2, PH3.3 x Pozi: PZ1, PZ2, PZ3.6 x Hex: HW3, HW4, HW5, HW6, HW7, HW8.6 x Torx: T10, T15, T20, T25, T30 and T40.3 x hex key wrenches: 1.5, 2.0 and 2.5mm.1 x 1/4in drive universal joint.2 x 1/4in drive extension bars: 2in and 4in.1 x 1/4in drive flexible extension: 6in.1 x 1/4in de-sliding T bar.1 x 1/4in drive quick ratchet handle.1 x handle.1 x 1/4in drive spinner handle: 6in.1 x 1/4in drive bit adaptor.1 x Blow case.

IRWIN Vise-Grip 40° bent long nose pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.Length: 200mm (8in)

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Listing Date:07/17/2023

Stabila Spirit Level 2 Vial, is a smooth-ribbed box section spirit level, the ribbed profile provides extra strength preventing the profile from bending. This spirit level can be used to check the horizontally of overhead surfaces by turning it and its horizontal vial upside down. You can then measure precisely from underneath.1 vertical vial and 1 horizontal vial. Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m. Stabila patent. Vials that are moulded in.Stabila 80AN Level 2 Vial.Length: 1000mm (40 in).