Courroie Cuir de vache avec la couverture d'unité centraleConfort / caractéristiquesboucle en métal de haute qualité ornements à la mode tailles Largeur : 40 mm Longueurs : 85, 95, 105, 115, 125 couleur noir
Description:Highly sensitive,use immediately after matching.This project is not a remote control, it is just a remote key chip replacement.The chip will need programming by a group dealer or by the locksmith.Chip can be programmed only ONCE.Specification:-Color: Black-Material: Ceramic-Size: 12x5x3mm-Type: 4D69 ID69 80 Bits-Fit For Yamaha and other Motorcycles.Package Included:1 X Transponder Chip
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Feature:1. Echo cancellation and noise suppression (CVC) technology during call.2. bluetoothanswer, hang up, reject, redial, private answerand other functions.3. Support bluetooth stereo music playback.4. Support mobile phone navigation, support A2DP.5.Support to pair two mobile phonesat the same time.6. Support MP3/WMA music format.7. Automatic power off memory function.8. Support bluetooth power off automatically back.9. Support calling broadcast function.10. Support Chinese / English.11.Built-in solar panel for convenient using.Specification:Material: ABSColor: BlackCable Length: 50cmWorking voltage: 3.3V-4.2VPower consumption: 1WWorking temperature: -20-50 degreesFrequency response: 20HZ-15KHZbluetooth sound processing: A2DPbluetooth transmission distance: 10 metersCharging voltage: 5V/500mAWorking temperature: -20-50 degreesbluetooth version: V3.0+EDRCharging time: about 3 hoursCall time: about 8 hoursStandby time: 50 hours / 2 daysPackage Included:1 X Solar bluetooth Handsfree1 X Cable1 X User Manual1 X Holder Accessary
The Alpinestars Câ10 glove incorporates a hydrophobic textile outer and DRYSTAR® liner to keeps your hands dry while riding in the rain. Preâcurved fingers and a knitted cuff ensure the glove is as comfortable as it is protective. Features Hydrophobic textile upper construction is lightweight and durable. Single layer, soft Goatskin palm construction provides abrasion resistance where it is needed the most. DRYSTAR® membrane insert is both waterproof and breathable, keeping the hands dry and comfortable. Overâmolded hard PU knuckle affords excellent impact protection. Additional protection provided by 4mm EVA foam padding on top of the hand and fingers. Preâcurved finger construction reduces fatigue while riding. Accordion stretch inserts on fingers improves fit and comfort. Thinsulate® thermal insulation keeps hands warm.
Description:high performance projector headlightHigh/Low beam effect controlled by driveSuper bright LED Headlight with CCFL angel eyeDevil eyeMake your motorcycle eye-catching both daytime and nightProvides clear vision for driving at night, will not dazzle on-coming vehiclesEasy installationSpecification:Color Temperature of LED: 6000KMaterial: Aluminum + ABSWorking Voltage: 12-80VPower: 30WWeight:200gColor: Type1 Blue + Red + White Type2 Green + Red + white Type3 white + Red + whiteThree function: Hi-beam , Low beam, StrobeWorking Temperature: -40 degrees centigrade to 40 degrees centigradeLuminous Flux: 3000LM/WPlacement on vehicle: frontFitment:Motorcycle Scooter E-Bike ATV ect.Package Included:1 X LED Motorcycle Headlight With Angel Eye
Double spoiler with incorporated air extractors: optimization of the aerodynamic trailand internal cooling. SHARK skin peak side fastenings: passive reduction of aerodynamic noise. A very compact helmet that only weighs 1,290g, while offering a most comfortable and comprehensive accessory. A micro-tech interior with antibacterial properties under the AEGIS label. Features Constructed from carbon aramid fibre Constructed from multiaxial glass fiber Integrated UV380 label & anti-scratch sun visor Double D-ring strap Visor can be fitted with a Pinlock Max Vision® film insert 2 shell sizes : optimal morphological adjustment Optimal comfort for the persons wearing glasses Quick release visor system Removable and washable cheek pads and inner lining (Use the delicates or cold cycle and place inside a washing net) Planned location for SHARKTOOTH® Anti-scratch visor AEGIS-interior
