22mm 7/8inch Black Retro Modified Drag Z Handlebar For Harley Cruise Motorcycle

Weight:
1590 ± 50 gr.
Material:
Technopolymer
Inner lining:
Removable inner lining Removable cheek pads Antiallergic fabric
Buckle:
Micrometric system
Homologation:
Double Homologation P/J
Visor:
Anti scratch clear visor Small smoked sun visor Pinlock ready (Pinlock lens not included)
Ventilation:
Frontal air ventilation, 2 x upper and 2 x chin guard 2 x rear extractors
Other:
Removable Chin guard Caps for jet version

This jacket represents the right compromise between performance and price price, thanks to the mix between new generation fabrics and the possibility to buy optional insulating lining (Thermo Liner).
Features new very light double-layer fabric Tenax Tactel with H20ut membrane with insert on neck and wrists with Soft Shell fabric. Inside Fieldsensor mesh to spread out sweating and humidity, protectors and specially taped waterproof zippers.
Materials: High visibility reflex areas Teflon coated for water repellent items 3 layers transpring fabric Fieldsensor - Anti humidity Soft Cell stretch material for great fitting High resistance Tenax Tactel polyamide
Ergonomy: Adjustable waist fastening Micrometric adjustable collar system
Performance: Multi-layered item
Comfort: H2OUT membrane Soft Shell around neck area and zipper
Protection: Inner back protector optional Multitech protectors

Past the turning point Engineered for the unexpected. The guaranteed to keep you dry® forecast stays packed away until you need it. Easy to put on over your riding gear, stows away in its own pocket and takes up minimal volume in your gear.
Top 3 benefits
Stay dry in unexpected weather Packs to very small volume in its own pocket Weatherproofness only when you need it
Features
Guaranteed to keep you dry® Gore-Tex® paclite™ two-layer laminate technology 3M™ Scotchlite™ reflective material Water resistant YKK® zippers in exposed areas Snap adjustment at bottom hem Packable pant stuffs into its own internal pocket Gore on-road certified for waterproofness

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

The Cobra is a sports jacket and a direct descendent of our top-of-the-range racing suits. Everything about this jacket - from the material and construction to the fit and safety features - is designed with performance in mind. Protection / Security
Main external material: full grained leather, 1.4mm as perour race suits. Furygan Skin Protect lining approved by Furygan’s R&D to reinforce leather products in terms of tearing and abrasion resistance. D3O homologated protectors for elbows, shoulders and back (1621-2 level 1 Central Back type homologated back protector fitted as standard), which offer full protection without restricting comfort and freedom of movement. External protection shells on the shoulders. Areas exposed to abrasion in a crash situation are reinforced with triple stitching to avoid tearing.
Ergonomics / Comfort
Sport fit Thermal padded lining with aluminium inserts on the chest for maximum protection against the cold. Racing sleeves with Kevlar stretch inside the arms. Leather stretch behind the shoulders, and the elbows. Neoprene inserts on collar and the wrists. Waterproof treated leather. Two connecting zips (one short and one full) mounted on an elastic belt. Four pockets (two inside, and two outside).

Outer shell
supple cowhide back goatskin palm colourfast & sweat-proof
Lining
unlined
Fit/features
special flat seam velcro adjustment at cuffs perforated leather panels perforated finger side walls
Protection
side of hand & ball of the thumb reinforced with leather & schoeller®-keprotec®